Toe clearance shall be 30 inches (760 mm) wide minimum....
Search Results "Shall"
Filters
Commonly Searched Documents
-
306.2.5 Width
-
409.4.7.4 Cord
The telephone cord shall be 29 inches (735 mm) long minimum....
-
407.3.3.3 Duration
Door reopening devices shall remain effective for 20 seconds minimum....
-
307.5 Required Clear Width
Protruding objects shall not reduce the clear width required for accessible routes....
-
306.3.5 Width
Knee clearance shall be 30 inches (760 mm) wide minimum....
-
404.3.7 Revolving Doors, Revolving Gates, and Turnstiles
Revolving doors, revolving gates, and turnstiles shall not be part of an accessible route....
-
206.2.13 Exercise Machines and Equipment
Exercise machines and equipment required to comply with 236 shall be on an accessible route....
-
807.2.2 Benches
Where benches are provided, at least one bench shall comply with 903....
-
404.2.1 Revolving Doors, Gates, and Turnstiles
Revolving doors, revolving gates, and turnstiles shall not be part of an accessible route....
-
407.4.8 Car Position Indicators
Audible and visible car position indicators shall be provided in elevator cars....
-
217.3 Volume Controls
All public telephones shall have volume controls complying with 704.3....
-
407.4.6.4.2 Location
Emergency controls, including the emergency alarm, shall be grouped at the bottom of the panel....
-
R304.4 Blended Transitions
Blended transitions shall comply with R304.4 and R304.5....
-
214.1 General
Where provided, washing machines and clothes dryers shall comply with 214....
-
407.4.8.1.1 Size
Characters shall be 1/2 inch (13 mm) high minimum....
-
407.4.8.1.2 Location
Indicators shall be located above the car control panel or above the door....
-
216.9 TTYs
Identification and directional signs for public TTYs shall be provided in accordance with 216.9....
-
234.2 Load and Unload Areas
Load and unload areas serving amusement rides shall comply with 1002.3....
-
502.3.2 Length
Access aisles shall extend the full length of the parking spaces they serve....
-
R407.7 Surfaces
Surfaces of ramp runs and landings shall comply with R302.7....
-
806.2.6 Turning Space
Turning space complying with 304 shall be provided within the guest room....
-
T402.8 Running Slope
The maximum running slope of ramps and bridgeplates shall comply with T402.8.1 or T402.8.2....
-
T303.1 General
Handrails, stanchions, and handholds in non-rail vehicles shall comply with T303....
-
T210.1 General
Non-rail vehicles shall provide wheelchair spaces in accordance with T210....