(a) No alteration shall be undertaken which decreases or has the effect of decreasing accessibility or usability of a building or facility below the requirements for new construction at...
Search Results "Technical Requirement"
Filters
Commonly Searched Documents
-
4.1.6(1)(a)
-
4.6.6 Surface
The surface of the clear floor or ground space required by section 4.6.4 shall be firm and stable. The type of surface should be appropriate to the setting and level of development. ...
-
4.6.2 Operable Parts
Controls and operating mechanisms for telescopes and periscopes that are useable from a seated position shall comply with the operable parts requirements in sections 308 and 309.4 of the...
-
3.5.2 Color of the ISA
The ISA is not required to be blue and white when posted on Federal lands....
-
F208.2.4 Van Parking Spaces
For every six or fraction of six parking spaces required by F208.2 to comply with 502, at least one shall be a van parking space complying with 502....
-
4.7.4 Surface
The surface of the clear floor or ground spaces required by section 4.0 shall be firm and stable. The type of surface should be appropriate to the setting and level of development....
-
1011.6 Water Spouts
This section requires water spouts at water hydrants and water utility hook-ups to be 28 inches minimum and 36 inches maximum above the ground....
-
A4.34.5 BATHROOMS
Although not required by these specifications, it is important to install grab bars at toilets, bathtubs, and showers if it is known that a dwelling unit will be occupied by elderly or severely...
-
F245.2.4 Dispersion
Picnic units required to provide mobility features complying with F245.2 shall provide choices of picnic units comparable to, and integrated with, those available to others....
-
F244.2.2 Dispersion
Camping units required to provide mobility features complying with F244.2 shall provide choices of camping units comparable to, and integrated with, those available to others....
-
III−7.3100 Application (ADAAG §4.1.1(1))
ADAAG applies to all areas in new construction and alterations, except where limited by scoping requirements....
-
Exception 6
The addition or replacement of signs and/or identification devices shall be limited to the actual scope of work of the project and shall not be required to comply with Section 11B-202.4....
-
Fire Alarms
Compliant fire alarm systems are required only in alterations where fire alarm systems are installed new, replaced, or upgraded (§215.1, Ex. 1)....
-
11B-812.6.3 Ambulatory
Vehicle spaces serving ambulatory EVCS shall be 120 inches (3048 mm) wide minimum and shall not be required to have an adjacent access aisle....
-
Sections 1 Through 3 (Section-By-Section Analysis and Response to Comments)
- Sections 1 Through 3 (Section-By-Section Analysis and Response to Comments) Sections 1 through 3 contain general requirements, including definitions....
-
§1193.1 Purpose.
This part provides requirements for accessibility, usability, and compatibility of telecommunications equipment and customer premises equipment covered by the Telecommunications Act of 1996...
-
68.101(c)(5)(G) Public telephones
(G) If public telephones are required by the lease agreement, or are provided to serve the leased area, at least one public telephone shall comply with TAS 704....
-
[ADA Title II] 2010 Standards
. [§35.104] The 2010 ADA Standards for Accessible Design, which consist of the 2004 ADAAG and the requirements contained in §35.151....
-
§ 37.29(a)
(a) Providers of taxi service are subject to the requirements of this part for private entities primarily engaged in the business of transporting people which provide demand responsive service...
-
1010.1.4.1 Revolving doors
Revolving doors shall not be part of an accessible route required by Section 1009 and Chapter 11A or 11B....
-
11B-201.2 Application based on building or facility use
Where a site, building, facility, room, or space contains more than one use, each portion shall comply with the applicable requirements for that use....
-
1013.4, Item 1
Each grade-level exterior exit door that is required to comply with Section 1013.1 shall be identified by a tactile exit sign with the word, “EXIT.”...
-
1133A.4.1, Item 1
Sinks and work surfaces required by Section 1133A.4 shall be designed to enable repositioning to a minimum height of 28 inches (711 mm)....
-
§ 35.102(b)
(b) To the extent that public transportation services, programs, and activities of public entities are covered by subtitle B of title II of the ADA, they are not subject to the requirements...