The floor or landing on the dwelling unit side of the primary entry door and any required exit door shall have a minimum length of not less than 44 inches (1118 mm)....
Search Results "Unassisted Entry"
Filters
Commonly Searched Documents
-
1132A.5.1 General
-
11B-608.2.2 Standard roll-in type shower compartments
30 inches (760 mm) wide minimum by 60 inches (1525 mm) deep minimum clear inside dimensions measured at center points of opposing sides and shall have a 60 inches (1525 mm) wide minimum entry...
-
1132A.5.1 General
The floor or landing on the dwelling unit side of the primary entry door and any required exit door shall have a minimum length of not less than 44 inches (1118 mm)....
-
TownSteel CP Series Grade 3 Cylindrical Lockset Cylindrical Locks
Specification: Door Thickness 1-3/8" - 1-3/4" Backset 2-3/8" to 2-3/4" adjustable Faceplate 1" wide with square corner Strike Steel, T-Strike Function Entry, Privacy, Passage...
-
SDC Bollard Post with Push Plate or Touch Panel
Alternative to wall mounted access control or switches for entry doors. Bollard post provide visibility and meet accessibility guidelines....
-
Universal Industrial Products SOSS UltraLatch
The SOSS® UltraLatch® is a totally new concept in door entry hardware. Designed to be the most convenient, practical and aesthetically pleasing door latch you have ever used....
-
DOT Response
The NPRM did not propose to require any stations to be retrofitted for level-entry boarding....
-
SUPPLEMENTARY INFORMATION:
At stations where track adjacent to platforms is not shared with existing freight service, railroads must provide level-entry boarding....
-
Maintenance of Accessible Features
Entities should plan for these issues and modify operational policies as needed to provide accessible means of entry while the pool is open....
-
Paperwork Reduction Act
Under this rule, railroads that choose to use a means of meeting the performance standard other than level-entry boarding would have to submit a proposed plan to FRA or FTA demonstrating...
-
Milgard® SmartTouch™ Window Lock
Using AAMA certification, testing guidelines, independent lab engineers demonstrated that the SmartTouch lock exceeds rigorous California forced-entry codes by 25%. ...
-
Press Boxes: ADA Standard Section 206.2.7
Section 206.2.7 covers scoping requirements in the most current ADA Standards for accessible routes to press boxes.
-
Clear Floor or Ground Space: ADA Standard Section 1008.4.2
Where play components include a seat or entry point, designs that provide for an unobstructed transfer from a wheelchair or other mobility device are recommended....
-
11B-1008.4.2 Clear floor or ground space
Where play components include a seat or entry point, designs that provide for an unobstructed transfer from a wheelchair or other mobility device are recommended....
-
11B-206.2.7 Press boxes
Exceptions: An accessible route shall not be required to press boxes in bleachers that have points of entry at only one level provided that the aggregate area of all press boxes is...
-
11B-404.1 General
A sign visible from the approach side complying with Section 11B-703.5 shall be posted stating “Entry restricted and controlled by security personnel”....
-
11B-233.3.1.2.6.2 Test number one, individual building test
In the case of resident parking areas, the closest point to the planned entrance will be measured from the entry point to the parking area that is located closest to the planned entrance...
-
11B-608.5.3 Alternate roll-in type shower compartments
Where a seat is not provided, the controls, faucets, and shower spray unit shall be installed on the side wall farthest from the compartment entry....
-
1132A.5.1 General
The floor or landing on the dwelling unit side of the primary entry door and any required exit door shall have a minimum length of not less than 44 inches (1118 mm)....
-
F206.7.5 Existing Site Constraints
For example, a new building constructed between and connected to two existing buildings may have insufficient space to coordinate floor levels and also to provide ramped entry from the public...
-
206.7.5 Existing Site Constraints
For example, a new building constructed between and connected to two existing buildings may have insufficient space to coordinate floor levels and also to provide ramped entry from the public...
-
502.4 Platform Accessibility Features
Section 9.3.3 Enable sequential entry of multiple (chorded) keystrokes; B. Section 9.3.4 Provide adjustment of delay before key acceptance; C....
-
502.4 Platform Accessibility Features
Section 9.3.3 Enable sequential entry of multiple (chorded) keystrokes. 2. Section 9.3.4 Provide adjustment of delay before key acceptance. 3....
-
11B-608.2.2 Standard roll-in type shower compartments
30 inches (760 mm) wide minimum by 60 inches (1525 mm) deep minimum clear inside dimensions measured at center points of opposing sides and shall have a 60 inches (1525 mm) wide minimum entry...
