a dwelling, the following consumer information shall be provided in each adaptable dwelling unit available for occupancy: (1) Notification of the alternate heights available for the kitchen...
Search Results "U-Shaped Kitchen"
Commonly Searched Documents
-
4.34.4 CONSUMER INFORMATION
-
11B-809.12 Electrical receptacles, controls and switches
When the reach is over a kitchen work surface and base cabinet, the work surface shall be 36 inches (914 mm) maximum above the finish floor and 25 1/2 inches (650 mm) maximum in depth....
-
1130A.1 General
The accessible route shall pass through the primary entry door, and shall connect with all additional exterior doors, required clear floor spaces at kitchen appliances and bathroom fixtures...
- Walk-A-Sured Clear Anti-Slip Safety Coating System
-
Audible Information Systems (slide 14)
We were working, talking to the U of M folks about – they’re developing a 2-D bar-code system that would go with a hand-held....
-
Knee and Toe Clearance
clearances are provided for certain types of spaces and fixtures, such as single-user toilet or bathing facilities accessed only through a private office (Exception 2), lavatories and kitchen...
-
[F] WORKSTATION
snack bars, sales counters and public counters; guardhouses; toll booths; kiosk vending stands; lifeguard stations; maintenance equipment closets; counter and equipment areas in restaurant kitchens...
-
Verify Rough Plumbing
11B-608.5 Location of shower drains and floor slope. 11B-608.5 Shower threshold. 11B-608.7 Kitchen...
-
Verify Rough Plumbing
11B-608.5 Location of shower drains and floor slope. 11B-608.5 Shower threshold. 11B-608.7 Kitchen...
-
[F] WORKSTATION
snack bars, sales counters and public counters; guardhouses; toll booths; kiosk vending stands; lifeguard stations; maintenance equipment closets; counter and equipment areas in restaurant kitchens...
-
[F] WORKSTATION
snack bars, sales counters and public counters; guardhouses; toll booths; kiosk vending stands; lifeguard stations; maintenance equipment closets; counter and equipment areas in restaurant kitchens...
- Moen Stainless 30" Grab Bar
- Bradley Verge Lavatory Systems
- Sennheiser SI 29-5 Five-Channel Modulator
-
Plan 5B: 13-Foot Wide Accessible Guest Room
(section 607.2); • Lavatory with vanity counter top recessed to permit shorter rear grab bar at water closet (section 604.5.2); • T-shaped turning space in room (section 603.2.1);...
-
1136A.2 Switch and control heights
If the reach is over a physical barrier or an obstruction (for example, a kitchen base cabinet) switches and controls shall be located within the reach ranges specified in Section 1138A.3...
-
606.2 Clear Floor Space
A parallel approach complying with 305 shall be permitted to a kitchen sink in a space where a cook top or conventional range is not provided and to wet bars. 2....
-
606.2 Clear Floor Space
A parallel approach complying with 305 shall be permitted to a kitchen sink in a space where a cook top or conventional range is not provided and to wet bars. 2....
-
606.2 Clear Floor Space
A parallel approach complying with 305 shall be permitted to a kitchen sink in a space where a cook top or conventional range is not provided and to wet bars. 2....
-
1136A.2 Switch and control heights
If the reach is over a physical barrier or an obstruction (for example, a kitchen base cabinet) switches and controls shall be located within the reach ranges specified in Section 1138A.3...
-
1136A.2 Switch and control heights
If the reach is over a physical barrier or an obstruction (for example, a kitchen base cabinet) switches and controls shall be located within the reach ranges specified in Section 1138A.3...
-
11 [§ 4.7.6]
11 [§ 4.7.6] A built-up curb ramp typically consists of asphalt or concrete that is poured and shaped into a ramp that runs at a 90-degree angle away from an intact curb down to the roadway...
-
2. Background
These descriptions are not intended as exhaustive or scholarly reviews of particular topics but instead as brief summaries of critical contextual issues that helped shape Advisory Committee...
-
Roll-in Access [1014.2.2]
When roll-in access is provided, a turning space at least 60 inches in diameter or a T-shaped space with an arm at least 60 by 36 inches and a base at least 36 inches wide and 24 inches...