Keypads shall be in a 12-key ascending telephone keypad layout. Characters and symbols shall be centered on the corresponding button. The number five key shall have a single raised...
Search Results "ITU-T: International Telecommunications Union Telecommunications Standardization Sector"
Filters
Commonly Searched Documents
-
11B-411.2.1.2.1 Keypads
-
B6
[ADA Standards § 4.6.4] Yes No...
-
Impact Recovery Systems Slow Stop Rebounding Bollard Video Presentation
A video of the SlowStop Rebounding Bollard Presentation.
-
Impact Recovery Systems Slow Stop Rebounding Bollard with Accessible Parking Sign
This video is a Demonstration of a Slow Stop Handicap Parking Bollard.
-
G. ANSI/AAMI HE 75
The Access Board has considered the recommended practices in Chapter 16 of ANSI/AAMI HE 75 in developing the technical criteria for the proposed standards....
-
11B-805.2.3 Turning space
Turning space complying with Section 11B-304 shall be provided within the room.
-
805.2 Turning Space
Turning space complying with 304 shall be provided within the room.
-
805.2 Turning Space
Turning space complying with 304 shall be provided within the room.
-
805.2 Turning Space
805.2 Turning Space. Turning space complying with 304 shall be provided within the room.
-
11B-805.2.3 Turning space
Turning space complying with Section 11B-304 shall be provided within the room.
-
11B-805.2.3 Turning space
Turning space complying with Section 11B-304 shall be provided within the room.
-
4.30.7(3)
Text telephones required by 4.1.3(17)(c) shall be identified by the international TDD symbol (Fig 43(c))....
-
Section 35.151(c) Accessibility standards for new construction and alterations (Section-by-Section Analysis)
consistent to the extent permitted by law, and to harmonize the Federal requirements with the private sector model codes that form the basis of many State and local building code requirements...
-
Exit Stairway Enclosures [IBC §1007.3 and 1019 (2003), §1003.2.13.2 and 1005.3.2 (2000)]
The ADA Standards apply requirements for stairways to each stair that is part of a required means of egress (§210). Exit Stairway Enclosures...
-
General
Section 207.1 of the 2010 Standards reference the International Building Code (IBC) for scoping and technical requirements for accessible means of egress....
-
4.1.1(6)
bathing units clustered at a single location; however, at least one toilet unit complying with 4.22 or one bathing unit complying with 4.23 should be installed at each location whenever standard...
-
If a state or local authority interprets an accessibility requirement differently than how a comparable requirement in the ADA Standards is interpreted under the ADA (or waives that requirement completely), does this have any bearing on ADA compliance?
may interpret or waive their own state or local accessibility codes as they see fit, those decisions have no effect on the obligation to comply with requirements of the applicable ADA Standards...
-
11B-706.2 Receiver jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....
-
706.2 Receiver Jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....
-
11B-706.2 Receiver jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....
-
706.2 Receiver Jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack. [ECTCR UFAS 4.33.7]...
-
706.2 Receiver Jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....
-
11B-706.2 Receiver jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....
-
2.1.2.1 Summary of IEC 118‒4 (1981) Standards
2.1.2.1 Summary of IEC 118‒4 (1981) Standards With a source of 1000 Hz equal to the long-time average level of the speech signal applied to the input of the system, the resulting field...
