There is also no accepted standard method for using a digital inclinometer, lasers, or other surveying equipment to measure ramp slope and cross slope....
Search Results "Dune Crossing"
Commonly Searched Documents
-
Some existing measurement protocols
-
Additional Technical Criteria Considered for Handrails on Ramps
These technical criteria are available at http://www.access-board.gov/ada-aba/final.cfm#a505 and address continuity, height, clearance, gripping surface, cross section, surfaces, fittings...
-
Changes in Level at Entry to Wheelchair Spaces (M303.3)
Ramp runs would be required to have a running slope not steeper than 1:12 and a cross slope not steeper than 1:48....
-
Alterations to Existing Facilities
For example, if a new bench is installed on a sidewalk that has a cross slope exceeding 2 percent, the sidewalk is not required to be altered to reduce the cross slope because the bench...
-
Soiltac Powder Mix-In
Where there was water flow crossing the segment, the surface was soft under foot but returned to a natural surface state....
- Pilot Rock AT Series Traditional A-Frame Picnic Table With Steel Braces - Using Recycled Plastic
- Detectable Warning Systems, Inc. AlertTile® Detectable Warning
- Konica Minolta bizhub C224
- Beneficial Designs Public Rights of Way Assessment Process (PROWAP)
-
Sections 505.10.2 and 505.10.3
Commenters noted that the 2010 Standards will require handrail gripping surfaces with a circular cross section to have an outside diameter of 2 inches, and that this requirement would impose...
-
Issue 7: Repair/replacement (put it back right!)
When the APS is not correctly installed, there is a risk that a person who is blind will cross a street with the wrong WALK indication or in the wrong direction....
-
Station 6-Speed
The video was subsequently reviewed to determine the times that participants crossed each of the two lines....
-
Handrails Along Walking Surfaces [§403.6, §505]
Handrails can have circular or non-circular cross-sections, but must have rounded edges. The gripping surface and adjacent surfaces must be free of abrasive or sharp elements....
-
§ 38.23(b)(13) Handrails
The handrail shall have a cross-sectional diameter between 11/4 inches and 11/2 inches or shall provide an equivalent grasping surface, and have eased edges with corner radii of not less...
-
§ 38.95(b)(13) Handrails
The handrail shall have a cross-sectional diameter between 11/4 inches and 11/2 inches or shall provide an equivalent grasping surface, and have eased edges with corner radii of not less...
-
§ 38.125(b)(13) Handrails
The handrail shall have a cross-sectional diameter between 11/4 inches and 11/2 inches or shall provide an equivalent grasping surface, and have eased edges with corner radii of not less...
-
1015.2 Where required
In assembly seating areas at cross aisles in accordance with Section 1029.16.2....
-
§ 38.83(b)(13) Handrails
Handrails shall have a cross-sectional diameter between 11/4 inches and 11/2 inches or shall provide an equivalent grasping surface, and have eased edges with corner radii of not less than...
-
Expert Report of Douglas J. Anderson, RAS, CASP, LCM Architects (August 8, 2018)
Sidewalks & Walkways: The cross slope on the exterior ramp exceeds the maximum slope allowed of 1:48 (1991 ADA Stds 4.8.6; 2010 ADA Stds 405.3)....
- National Council on Independent Living (NCIL)
- ADA Fast Finder
- MOCEANS Center for Independent Living, Inc. - Long Branch and Toms River, NJ
-
Auditorium accessible seating
Graphic description of Tired seating; Tired seating with intermediate levels as possible cross aisles. ...
-
2.6
lines of sight comparable to those for members of the general public, (b) including wheelchair spaces as an integral part of the fixed seating plan, (c) providing the appropriate depth for cross...