Elevator hoistway doors shall comply with 408.3....
Search Results "Door Pull"
Filters
Commonly Searched Documents
-
408.3 Elevator Doors
-
408.3 Elevator Doors
Elevator hoistway doors shall comply with 408.3....
-
R310.3.2 Length
Access aisles shall extend the full length of the vehicle pull-up spaces they serve....
-
17.1 Q. Is it correct that only the exterior side of the main entry door of covered multifamily dwellings must meet the ANSI requirements?
The exterior side of the main entry door is part of the public and common use areas and therefore must meet ANSI A117.1 1986 specifications for doors....
-
1012 Parking Spaces Within Camping Units and Picnic Units and Pull-Up Spaces at Dump Stations
[See subsections ...]
-
408.3.1 Sliding Doors
Sliding hoistway and car doors shall comply with 407.3.1 through 407.3.3 and 408.4.1....
-
408.3.1 Sliding Doors
Sliding hoistway and car doors shall comply with 407.3.1 through 407.3.3 and 408.4.1....
-
7b.
Is the door hardware (e.g., lever, pull, push, panic bar) usable with one hand, without tight grasping, pinching, or twisting of the wrist, to allow people who may not be able to easily...
-
408.3.2 Swinging Doors
Swinging hoistway doors shall open and close automatically and shall comply with 404, 407.3.2 and 408.3.2....
-
408.3.2 Swinging Doors
Swinging hoistway doors shall open and close automatically and shall comply with 404, 407.3.2 and 408.3.2....
-
TownSteel MS Series, Grade 1 with Push Pull Mortise Locks
The Push Pull handle is made out of the finest quality stainless steel to assure its longevity....
-
Opening Force [§404.2.9]
to fully open a door, not the initial force needed to overcome the door’s seal resulting from unequal pressure....
-
A4.13.9 DOOR HARDWARE
Some disabled persons must push against a door with their chair or walker to open it....
-
Opening Force
Section 404.2.9 addresses the opening force of doors and gates....
-
Sargent 8200 Mortise Lock with Push/Pull Trim
You need it all: heavy-duty push/pull hardware that is flexible, easy to use and aesthetically pleasing. The SARGENT 8200 mortise lock with push/pull trim provides all that and more....
-
11B-405.7.5 Doorways
Advisory 11B-405.7.5 Doors at ramp landings....
-
Door stop
[See subsections ...]
-
Can maneuvering for a forward approach be provided when there is space at least 60” deep in front of a door?
Space at least 60” deep in front of a door that is unobstructed on approach sides will provide sufficient depth for a forward approach if appropriate strike-side clearance is provided; but...
-
Passenger Loading Zones
The 1991 Standards and the 2010 Standards both include technical requirements for the vehicle pull-up space (96 inches wide minimum and 20 feet long minimum)....
-
11B-404 DOORS, DOORWAYS, AND GATES
[See subsections ...]
-
Common Questions (Entrances, Doors, and Gates)
Common Questions
-
11B-404 Doors, doorways, and gates
[See subsections ...]
-
11B-404 Doors, doorways, and gates
[See subsections ...]
-
Other Requirements in the ADA Standards
Operable Parts Operable parts used by building occupants, including alarms pulls and hardware for fire extinguisher cabinets, must comply (§205, §309)....
