The clear floor space adjacent to the control shall be located beyond the arc of the door swing. Advisory 11B-404.3.5 Controls. ...
Search Results "Door Hardware"
-
11B-404.3.5 Controls
-
11B-404.3.5 Controls
The clear floor space adjacent to the control shall be located beyond the arc of the door swing. Advisory 11B-404.3.5 Controls....
-
11B-404.3.5 Controls
The clear floor space adjacent to the control shall be located beyond the arc of the door swing. Advisory 11B-404.3.5 Controls. ...
-
Sargent FM7100 Multi-Point Auto Deadlocking Door System
Sturdy heavy-duty steel components firmly fasten the door to the frame - at top, bottom and center latch points - strengthening the opening during a windstorm event....
-
Hager Companies Rectangular Wrought Door Pull 2
Rectangular Wrought Door Pull Materials: - Aluminum, brass, bronze, stainless steel Accessible: - 2-1/2" (64 mm) Clearance available on special order....
-
4.13.5 Clear Width
Doorways shall have a minimum clear opening of 32 in (815 mm) with the door open 90 degrees, measured between the face of the door and the opposite stop (see Fig. 24(a), (b), (c), and (d...
-
4.13.5 CLEAR WIDTH
Doorways shall have a minimum clear opening of 32 in (815 mm) with the door open 90 degrees, measured between the face of the door and the stop (see Fig. 24(a), (b), (c), and (d))....
-
Architectural Builders Hardware Mfg., Inc. 6830 Series Time Out/Reverse Low Profile Hospital Latch
6830 Series Template - Low Profile, Reverse Latch, Cylindrical Push Pull Reverse Latch Cylindrical push/pull reverse latch 1-3/4" standard door thickness (specify if different...
-
404.3.5 Controls
The clear floor space adjacent to the control shall be located beyond the arc of the door swing....
-
404.3.5 Controls
The clear floor space adjacent to the control shall be located beyond the arc of the door swing....
-
11B-803.3 Door swing
Doors shall not swing into the room unless a turning space complying with Section 11B-304.3 is provided beyond the arc of the door swing....
-
11B-803.3 Door swing
Doors shall not swing into the room unless a turning space complying with Section 11B-304.3 is provided beyond the arc of the door swing....
-
TownSteel ED1400F Grade 1 Mortise Fire Device
ED1400F is ANSI Certified Grade 1 and UL listed for Fire Hardware. Retrofit 98/99 installation requires no additional door prep. ...
-
404.3.5 Controls
The clear floor space adjacent to the control shall be located beyond the arc of the door swing....
-
Sargent 7800 Mortise Lock with Push/Pull Trim Hardware
Stile Requirement - Minimum of 5 inches (125mm) Door Thickness 1 3/4 inches (44mm) to 2 inches (57mm) standard with adaptable spindle. Easy installation....
-
TownSteel ED5500F Grade 1 Fire Rim Device
ED5500F is ANSI/BHMA A156.3-2008 Grade 1 certified and UL listed for fire exit hardware....
-
Toilet Compartment Access
If the door and access were from the opposite side, although not as accessible I believe it is also §404 compliant because a self-closing door is not the same as a door with a closer? ...
-
Hager Companies 3800 Series Sliding Door Mortise Lock
Hager 3800 Series mortise lock provides maximum security and durability for the harshest environments. With field reversible handing, ease of installation, and both escutcheon and...
-
Allegion Von Duprin 88 Series Cross Bar Exit Device
Exit devices are a critical part of a door opening or access system and will provide safe and reliable service when properly applied and maintained....
-
Re: 404.2.4.3 Recessed Doors and Gates
Notice that the text does not match the figure for a push approach door. This may be an error in the Standards, but since the text governs, it exceeds the illustrated requirement. ...
-
11B-411.3.1 Type
Elevator door type shall comply with Section 11B-407.3.1....
-
11B-411.3.1 Type
Elevator door type shall comply with Section 11B-407.3.1....
-
TownSteel ED5500 Grade 1 Panic Rim Device
ED5500 is ANSI/BHMA A156.3-2008 Grade 1 certified and UL listed for panic exit hardware....
-
404.2.10 Door and Gate Surfaces
Swinging door and gate surfaces within 10 inches (255 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
