Accessible Route [9.2.2(2)] An accessible route at least 36 inches wide must be provided to all accessible elements, including phones and thermostats, provided for use by room...
Search Results "Character Width (VMS)"
Filters
Commonly Searched Documents
-
Accessible Route [9.2.2(2)]
-
Passing Space [§403.5.3]
Passing Space [§403.5.3] Passing space is required every 200 feet and must be provided as a 60” by 60” minimum space or as T-shaped space where each stem is at least 48”...
-
§ 38.93(a)(1)
(1) At least one door on each side of the car from which passengers board opening onto station platforms and at least one adjacent doorway into the passenger coach compartment, if...
-
ADA Sign Depot Elevator Door Jamb Floor Level Braille Sign - 4" x 4" - Tactile Sign
ADA Elevator Tactile Braille Floor Number Sign ADA compliant non-glare matte finish ADA compliant font and tactile (1/32 inch raised) Star and Numbers ADA...
-
Clearances: ADA Standard Section 403.5
Section 403.5 covers the current ADA Standards for clearances on walking surfaces that are part of an accessible route.
-
11B-502.2 Vehicle spaces
Car parking spaces shall be 108 inches (2743 mm) wide minimum and van parking spaces shall be 144 inches (3658 mm) wide minimum, shall be marked to define the width, and shall have an adjacent...
-
11B-502.2 Vehicle spaces
Car parking spaces shall be 108 inches (2743 mm) wide minimum and van parking spaces shall be 144 inches (3658 mm) wide minimum, shall be marked to define the width, and shall have an adjacent...
-
C. Doors
described above: ...with the exception of doors at shallow closets, do the doors to required accessible spaces, and all doors into and within guestrooms allow at least 32" clear passage width...
-
Accessible Parking Spaces for Cars
Accessible parking spaces for cars have at least a 60-inch-wide access aisle located adjacent to the designated parking space. The access aisle is just wide enough to permit a person...
-
Route and Destination Signs
Requirements for route and destination signs are subject to specifications for visual signs in section 703, including character height (810.6.2)....
-
R304.5.1.2 Shared Use Paths
In shared use paths, the width of curb ramps runs and blended transitions shall be equal to the width of the shared use path....
-
11B-502.2 Vehicle spaces
Car parking spaces shall be 108 inches (2743 mm) wide minimum and van parking spaces shall be 144 inches (3658 mm) wide minimum, shall be marked to define the width, and shall have an adjacent...
-
16.1 Q. Will a standard hung 32-inch door provide sufficient clear width to meet the requirements of the Fair Housing Act?
A. No, a 32-inch door would not provide a sufficient clear opening to meet the requirement for usable doors. A notation in the Guidelines for Requirement 3 indicates that a 34-inch...
-
11B-406.5.3 Landings
The landing clear width shall be at least as wide as the curb ramp, excluding any flared sides, or the blended transition leading to the landing....
-
§ 38.153(c)(2) Exception
Where compliance with the door width requirement of paragraph (c)(1) of this section is not feasible, the minimum door width shall be 27 in (685 mm)....
-
Figure 404.2.3 Clear Width of Doorways – Drawing from the U.S. Access Board
-
Access Board: Tactile Sign Visual Requirements
This video is part of a longer animation produced by the U.S. Access Board. View the animation video in its entirety on the Access Board's website...
-
Relationship to Accessible Routes: ADA Standard Section 502.7
Section 502.7 covers the current ADA Standards for the relationship between accessible parking spaces and accessible routes.
-
11B-502.7 Relationship to accessible routes
Parking spaces and access aisles shall be designed so that cars and vans, when parked, cannot obstruct the required clear width of adjacent accessible routes....
-
Hager Companies Three Knuckle - Full Mortise Swing Clear Hinge AB7002
Three Knuckle - Full Mortise Swing Clear Hinge AB7002 - Concealed Anti-Friction Bearing - Standard Weight Description: - For beveled edge doors - ANSI A8122 -...
-
Hager Companies Five Knuckle - Full Mortise Swing Clear Hinge BB1260
Five Knuckle - Full Mortise Swing Clear Hinge BB1260 - Ball Bearing - Standard Weight Description: - ANSI A8122 - For square edge doors - Non-rising removable pin...
-
Hager Companies Three Knuckle - Half Mortise Swing Clear Hinge AB7511
Three Knuckle - Half Mortise Swing Clear Hinge AB7511 - Concealed Anti-Friction Bearing - Heavy Weight Description: - For square edge doors - ANSI A8221 -...
-
Hager Companies Three Knuckle - Half Mortise Swing Clear Hinge AB7512
Three Knuckle - Half Mortise Swing Clear Hinge AB7512 - Concealed Anti-Friction Bearing - Heavy Weight Description: - For beveled edge doors - ANSI A8221 -...
