Is the operating control (switch, lever, button, or pull) of at least one of each type of dispenser or built-in equipment no higher than 54 inches above the floor (if there is clear floor...
Search Results "Built-In Storage"
-
H13
-
§ 36.406(b) Scope of coverage.
The 1991 Standards and the 2010 Standards apply to fixed or built-in elements of buildings, structures, site improvements, and pedestrian routes or vehicular ways located on a site....
-
5b.
Floor dimensions of at least 48 inches by 48 inches may be allowed in existing facilities built before the ADA went into effect....
-
[A] 101.3 Intent
strength, means of egress facilities, stability, sanitation, adequate light and ventilation, energy conservation, and safety to life and property from fire and other hazards attributed to the built...
- M-Dura Modern Suite | Moen Features Spotlight
- Panda TS.87 Lift & Slide Slim Profile Thermally Broken Corner Sample
- Panda TS.87 Thermally Broken Slim Profile Lift & Slide System
-
11B-306.3.3 Minimum required depth
the finish floor or ground at a depth of 8 inches (203 mm) minimum increasing to 29 inches (737 mm) high minimum above the finish floor or ground at the front edge of a counter with a built-in...
-
11B-306.3.3 Minimum required depth
the finish floor or ground at a depth of 8 inches (203 mm) minimum increasing to 29 inches (737 mm) high minimum above the finish floor or ground at the front edge of a counter with a built-in...
-
Ceiling Mounted Lifts
These lifts require no extra maneuvering space in the room adjacent to the exam table and require little storage space....
-
C203.1 General
Regardless of the medium or the method of transmission and storage, electronic content integral to the use of ICT shall conform to Level A and Level AA Success Criteria and Conformance Requirements...
-
4.1.4(8) HAZARDOUS
Hazardous occupancy includes, among others, the use of a building or structure, or a portion thereof, that involves the manufacturing, processing, generation or storage of corrosive, highly...
-
Elements Not Addressed in Final Rule
The proposed rule included proposed scoping and technical requirements for mobility device storage facilities and warming huts....
-
[A] 101.3 Intent
strength, means of egress facilities, stability, sanitation, adequate light and ventilation, energy conservation, and safety to life and property from fire and other hazards attributed to the built...
-
3. Element by Element Safe Harbor
The rule includes a general "safe harbor" under which elements in covered facilities that were built or altered in compliance with the 1991 Standards or the UFAS would not be required to...
-
11B-306.3.4 Clearance reduction
Exception: The knee clearance shall not be reduced at built-in dining and work surfaces required to be accessible by Section 11B-226.1....
-
11B-306.3.4 Clearance reduction
Exception: The knee clearance shall not be reduced at built-in dining and work surfaces required to be accessible by Section 11B-226.1. ...
-
11B-306.3.4 Clearance reduction
Exception: The knee clearance shall not be reduced at built-in dining and work surfaces required to be accessible by Section 11B-226.1....
- Better Living AVIVA Soap and Shower Dispenser 2 with Shower Basket
- Brewer Access™ High-Low Exam Table
-
11B-206.3 Location
An accessible route shall not pass through kitchens, storage rooms, restrooms, closets or other spaces used for similar purposes, except as permitted by Chapter 10. U.S....
-
11B-206.3 Location
An accessible route shall not pass through kitchens, storage rooms, restrooms, closets or other spaces used for similar purposes, except as permitted by Chapter 10. U.S....
- GRIT Freedom Chair
-
11B-206.2.1 Site arrival points
between the site arrival point and the accessible facility dictates vehicular access – for example, an office complex on an isolated site that has a private access road, or a self-services storage...