Search Results "Access Control"
Filters
Commonly Searched Documents
-
Figure 404.2.4.3(c) Maneuvering Clearance at Recessed Doors and Gates – Drawing from the U.S. Access Board
-
Figure 404.2.4.3(b) Maneuvering Clearance at Recessed Doors and Gates – Drawing from the U.S. Access Board
-
Figure 406.2 Counter Slope of Surface Adjacent to Curb Ramps – Drawing from the U.S. Access Board
-
Figure 609.2.2 Grab Bar Non-Circular Cross Section – Drawing from the U.S. Access Board
-
Figure 608.3.3 Grab Bars for Alternate Roll-In Type Showers – Drawing from the U.S. Access Board
-
Figure 1003.3.1 (Exception 2) Edge Protection at Boat Slips – Drawing from the U.S. Access Board
-
1133A.2.1 Clear width
Kitchens shall have a minimum clear width measured between any cabinet, countertop or the face of any appliance (excluding handles and controls) that projects into the kitchen and the opposing...
-
§382.57(b)
(b) As a carrier, you must comply with the following requirements for any shared-use automated airport kiosks you jointly own, lease, or control at a U.S. airport with 10,000 or more enplanements...
-
§ 36.303(d)(1)(iii)
(iii) This part does not require a public accommodation to use public telephones equipped with volume control mechanisms, hearing aid compatible telephones, or TTYs for receiving or making...
-
§ 382.57(b)
(b) As a carrier, you must comply with the following requirements for any shared-use automated airport kiosks you jointly own, lease, or control at a U.S. airport with 10,000 or more enplanements...
-
§ 36.302(e)(2) Exception
The requirements in paragraphs (iii), (iv), and (v) of this section do not apply to reservations for individual guest rooms or other units not owned or substantially controlled by the entity...
-
1134A.6, Item 3
A clear maneuvering space at least 30 inches in width by 48 inches in length (762 mm by 1219 mm) shall be located outside the shower, flush and parallel to the control wall....
-
302.2 With Limited Vision
visual mode of operation is provided, ICT shall provide at least one mode of operation that magnifies, one mode that reduces the field of vision required, and one mode that allows user control...
-
4.19.5 Faucets
Lever-operated, push-type, and electronically controlled mechanisms are examples of acceptable designs....
-
1134A.6, Item 3
A clear maneuvering space at least 30 inches in width by 48 inches in length (762 mm by 1219 mm) shall be located outside the shower, flush and parallel to the control wall....
-
11B-608.10 Soap dish
Where a soap dish is provided, it shall be located on the control wall at 40 inches (1016 mm) maximum above the shower floor, and within the reach limits from the seat....
-
1133A.2.1 Clear width
Kitchens shall have a minimum clear width measured between any cabinet, countertop or the face of any appliance (excluding handles and controls) that projects into the kitchen and the opposing...
-
11B-404.3 Automatic and power-assisted doors and gates
Automatic and power-assisted doors are often used by designers to provide accessibility when door closer pressure would exceed the allowable opening force for interior or exterior doors....
-
Summit Independent Living Center, Inc. - Missoula, Hamilton, Kalispell, Ronan, MT
Summit Independent Living Center, Inc. is a non-profit, non-residential program serving people with mobility, neurological, hearing, visual, and other disabilities governed by a consumer-controlled...
-
§382.57(a)(2)
(2) You must ensure that at least 25 percent of automated kiosks you own, lease, or control in each location at a U.S. airport meet the design specifications in paragraph (c) of this section...
-
F206.6.1 Existing Elevators
Where elements of existing elevators are altered, the same element shall also be altered in all elevators that are programmed to respond to the same hall call control as the altered elevator...
-
§382.21(b)(1)
Centers for Disease Control or Public Health Service; comparable agencies in other countries; the World Health Organization)....
-
§ 1194.25(j)(3)
(3) Where any operable control is more than 10 inches and not more than 24 inches behind the reference plane, the height shall be 46 inches maximum and 15 inches minimum above the floor....
-
206.6.1 Existing Elevators
Where elements of existing elevators are altered, the same element shall also be altered in all elevators that are programmed to respond to the same hall call control as the altered elevator...
