(iv) (S)he has specifically determined that the plans provide: (A) accessible car and van-accessible parking spaces required by the ADA Standards if parking facilities are to be provided...
Search Results "Shower Clear Floor Space"
-
18(a)
-
Sharing an Access Aisle
Two spaces are permitted to share an access aisle. The proposed rule, consistent with the original ADAAG, allowed access aisles to be provided on either side of the parking space....
-
11B-224.7.2 Multi-bedroom housing units with adaptable features
Kitchens within housing units containing accessible sleeping rooms with mobility features (including suites and clustered sleeping rooms) or on floors containing accessible sleeping rooms...
-
11B-703.5.5 Character height
Exception: Where provided, floor plans providing emergency procedures information in accordance with Title 19 shall not be required to comply with Section 11B-703.5.5....
-
11B-703.5.5 Character height
Exception: Where provided, floor plans providing emergency procedures information in accordance with Title 19 shall not be required to comply with Section 11B-703.5.5....
-
III-7.3110 Work areas
Or does it also apply to larger work spaces, such as restaurant kitchens, factory production areas, and warehouse space? It applies to the larger spaces as well....
-
11B-213.3.1 Toilet compartments
A toilet compartment is a partitioned space that is located within a toilet room, and that normally contains no more than one water closet....
-
11B-213.3.1 Toilet compartments
A toilet compartment is a partitioned space that is located within a toilet room, and that normally contains no more than one water closet....
-
11B-809.4 Toilet facilities and bathing facilities
In an effort to promote space efficiency, vanity counter top space in accessible residential dwelling units is often omitted....
-
11B-809.4 Toilet facilities and bathing facilities
In an effort to promote space efficiency, vanity counter top space in accessible residential dwelling units is often omitted....
-
404.2.10 Door and Gate Surfaces
Swinging door and gate surfaces within 10 inches (255 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
11B-604.4 Seats
The seat height of a water closet above the finish floor shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum measured to the top of the seat....
-
11B-604.4 Seats
The seat height of a water closet above the finish floor shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum measured to the top of the seat....
-
11B-604.4 Seats
The seat height of a water closet above the finish floor shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum measured to the top of the seat....
-
404.2.10 Door and Gate Surfaces
Swinging door and gate surfaces within 10 inches (255 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
Problem Four
Problem Four: No sign with the International Symbol of Accessibility is installed at each accessible parking space....
-
11B-809.8.3 Door maneuvering clearance.
A 39 inch (991 mm) minimum length is allowed at interior doors when a clear opening width of 34 inches (864 mm) minimum is provided....
- Guldmann Basic High Sling
- Hoist HD-1900 Dual Pulley System
-
Limited-Use/Limited-Application Elevators, Destination-Oriented Elevators and Private Residence Elevators
They require passengers to enter their destination floor on an entry device, usually a keypad, in the elevator lobby....
-
III-7.4300 Parking
For example, only four percent of the spaces in a 100-space lot must be accessible. Certain facilities, however, are subject to higher requirements....
-
M303.4.1 Breast Platform Adjustability
Breast platforms shall be continuously adjustable from a low height of 26 inches (660 mm) to a high height of 42 inches (1065 mm) above the floor....
-
11B-902.3 Height
The tops of dining surfaces and work surfaces shall be 28 inches (711 mm) minimum and 34 inches (864 mm) maximum above the finish floor or ground....
-
902.3 Height
The tops of dining surfaces and work surfaces shall be 28 inches (710 mm) minimum and 34 inches (865 mm) maximum above the finish floor or ground....