Receivers required to be hearing-aid compatible shall interface with telecoils in hearing aids through the provision of neckloops....
Search Results "Local Requirement"
-
11B-706.3 Receiver hearing-aid compatibility
-
11B-704.2.1 Clear floor or ground space
Because clear floor and ground space is required to be unobstructed, telephones, enclosures and related telephone book storage cannot encroach on the required clear floor or ground space...
-
11B-703.5 Visual characters
Exception: Where visual characters comply with Section 11B-703.2 _|Signs; Raised Characters|_ and are accompanied by Braille complying with Section 11B-703.3, they shall not be required...
-
11B-1005.1 Accessible routes
Where the total length of the gangway or series of gangways serving as part of a required accessible route is 30 feet (9144 mm) minimum, gangways shall not be required to comply with Section...
-
907.5.2.3.3 Group R-2
In Group R-2 occupancies required by Section 907 to have a fire alarm system, all dwelling units and sleeping units shall be provided with the capability to support visible alarm notification...
-
Appendix to Part 38—Guidance Material
28, 1998; 79 FR 21407, Apr. 16, 2014] This appendix contains materials of an advisory nature and provides additional information that should help the reader to understand the minimum requirements...
-
11B-232.5.1 Cubicles and counters
Exception: The inmate or detainee side of cubicles or counters at non-contact visiting areas not serving holding cells or housing cells required to comply with Section 11B-232 shall not...
-
KICK PLATE
Although kick plates are not necessarily required by the code, they are often applied to areas of doors required to have a smooth surface and be free of abrupt surface changes....
-
11B-206.4.8 Service entrances
ETA Editor's Note The ADA requirements included in Subsection 11B-206.4.8 are provided for information only. The CBC scoping requirements are more inclusive for alterations....
-
405.7 Landings
Ramps that do not have level landings at changes in direction can create a compound slope that will not meet the requirements of this document....
-
213.3.7 Coat Hooks and Shelves
Where coat hooks or shelves are provided in toilet compartments, at least one of each type complying with 604.8.3 shall be provided in toilet compartments required to comply with 213.3.1...
-
706.3 Receiver Hearing-Aid Compatibility
Receivers required to be hearing-aid compatible shall interface with telecoils in hearing aids through the provision of neckloops....
-
224.6.1 Guest rooms
provided as follows: (i) Facilities that are subject to the same permit application on a common site that each have 50 or fewer guest rooms may be combined for the purposes of determining the required...
-
217.4.7 Transportation Facilities
In transportation facilities, in addition to the requirements of 217.4.1 through 217.4.4, where at least one public pay telephone serves a particular entrance to a bus or rail facility,...
-
1008.4.3 Play Tables
EXCEPTION: Play tables designed and constructed primarily for children 5 years and younger shall not be required to provide knee clearance where the clear floor or ground space required...
-
407.2.2.1 Visible and Audible Signals
Visible and audible signals shall not be required at each destination-oriented elevator where a visible and audible signal complying with 407.2.2 is provided indicating the elevator car...
-
217.4.7 Transportation Facilities
In transportation facilities, in addition to the requirements of 217.4.1 through 217.4.4, where at least one public pay telephone serves a particular entrance to a bus or rail facility,...
-
216.10 Assistive Listening Systems
Each assembly area required by 219 to provide assistive listening systems shall provide signs informing patrons of the availability of the assistive listening system....
-
§ 382.21 Aircraft accessibility
(a) The following requirements apply to new aircraft operated under 14 CFR part 121 and ordered by the carrier after April 5, 1990 or delivered to the carrier after April 5, 1992: (1)...
-
11B-603.2.2 Overlap
Required clear floor spaces, clearance at fixtures, and turning space shall be permitted to overlap....
-
11B-411.2.1.3 Arrangement
Hall call console arrangement of required features shall comply with Section 11B-411.2.1.3....
-
§382.57(c)(5)(i)(D)(2)
(2) Information that duplicates information available on-screen and already presented audibly is not required to be repeated; and...
-
M301.3.1 Transfer Supports
Transfer surfaces required by M301.2 shall provide transfer supports and shall comply with M305.2....
-
M307.4 Operating Force
The force required to activate operable parts shall be 5 pounds (22.2 N) maximum....