Ramps not subject to the exception to 405.5 shall be designed to maintain a 36 inch (915 mm) minimum clear width when handrails are installed....
Search Results "Sign Clear Floor Space"
Filters
Commonly Searched Documents
-
11B-405.8 Handrails
-
Bradley 2 Station Verge Lavatory System LVRD2
Natural Quartz Materials are now GREENGUARD Certified as low-emitting materials TAS compliant units available Serves one or two users at a time Standard lavatory spacing...
-
Guardian Barrier-Free WideArea™ Eye/Face Wash GBF1724
Sign: ANSI-compliant identification sign. Quality assurance: Unit is completely assembled and water tested prior to shipment....
-
405.9.2 Curb or Barrier
A curb or barrier shall be provided that prevents the passage of a 4 inch (100 mm) diameter sphere, where any portion of the sphere is within 4 inches (100 mm) of the finish floor or ground...
-
E2-b
Are pedestrian routes leading to or serving each of the service or activity areas free of overhead objects with the bottom edge lower than 80 inches above the floor?...
-
2. Public Pay Phones
If more than one bank of public pay phones is provided on a given floor, does at least one pay phone per bank have the following features: [ADA Stds. 4.1.3(17)]...
-
4.1.3(8)(a)(i)
At least one must be a ground floor entrance. Public entrances are any entrances that are not loading or service entrances....
-
4.16.5* Flush Controls
Controls for flush valves shall be mounted on the wide side of toilet areas no more than 44 in (1120 mm) above the floor....
-
4.16.5* FLUSH CONTROLS
Controls for flush valves shall be mounted on the wide side of toilet areas no more than 44 in (1120 mm) above the floor....
-
405.9.2 Curb or Barrier
A curb or barrier shall be provided that prevents the passage of a 4 inch (100 mm) diameter sphere, where any portion of the sphere is within 4 inches (100 mm) of the finish floor or ground...
-
When door vision lights are limited to 100 square inches by the fire code, is compliance with the specified maximum height of 43” to the bottom edge still required?
However, compliance is not required when the lowest part of the vision light is more than 66” from the finish floor or ground....
-
11B-608.10 Soap dish
Where a soap dish is provided, it shall be located on the control wall at 40 inches (1016 mm) maximum above the shower floor, and within the reach limits from the seat....
-
Table 3
Whether the requirement reduces space needed for other purposes?...
-
Accessible Entrances
If you have several entrances and only one is accessible, a sign should be posted at the inaccessible entrances directing individuals to the accessible entrance....
-
904.6 Security Glazing
Where assistive listening devices are installed, place signs complying with 703.7.2.4 to identify those facilities which are so equipped....
-
Surcharges
., who is deaf, requests that a sign language interpreter be provided. The department plans to charge M.N. $250 for the course due to interpreter costs....
-
5. Accessible Features
routes; placing portable display racks and potted plants so they do not impede exterior and interior routes; snow removal on exterior routes; replacing damaged or stolen room identification signs...
-
§8.56(j)(2) Objectives of informal resolution/voluntary compliance
The terms of such an informal resolution shall be reduced to a written voluntary compliance agreement, signed by the recipient and the responsible civil rights official, and be made part...
-
C. Mobility Aids and Assistive Devices
[Sec. 382.41(h)] You cannot require passengers with disabilities to sign a waiver of liability for damage to or loss of wheelchairs or other assistive devices....
-
11B-411.2.1.2.1 Keypads
Keypads shall have a star (*) on the lower left button and a minus sign (-) on the lower right button. ...
-
904.6 Security Glazing
Where assistive listening devices are installed, place signs complying with 703.7.2.4 to identify those facilities which are so equipped....
-
Monetary Relief
Within 30 days, the United States shall send to the aggrieved person described in Paragraph 2 of this Agreement a copy of this signed Agreement, along with a Release of Claims, attached...
-
11B-411.2.1.2.1 Keypads
Keypads shall have a star (*) on the lower left button and a minus sign (-) on the lower right button....
-
11B-411.2.1.2.1 Keypads
Keypads shall have a star («) on the lower left button and a minus sign (-) on the lower right button....
