Product Details Brand: BestCare Ligature Resistant: Yes Appropriate for: Ligature Resistant Certification(s): UPC(GREEN) Faucet Centerset Spacing...
Search Results "Wheelchair Space (Recreation)"
Commonly Searched Documents
- Whitehall Mfg. Single Temp Hemispherical Pushbutton Pneumatic Valve Conical Faucet 4” Centerset
- Aluminum Swaged SG Series Pressure-Locked Grating
- Whitehall Mfg. Hot & Cold Hemispherical Pushbuttons Pneumatic Valve Conical Faucet 8" Centerset
- PEMKO 2 1/2" Carpet Separator Threshold No. 174
- Whitehall Mfg. Hot & Cold Hemispherical Pushbuttons Pneumatic Valve Conical Faucet 4" Centerset
- Falcon Waterfree Technologies Vitreous China Urinal F-4000
- Whitehall Mfg. Single Temp Hemispherical Pushbutton Pneumatic Valve, Conical Faucet, 8” Centerset
- TOTO® CT705ELN Commercial Flushometer High Efficiency Toilet
-
Expert Report of Ken Schoonover, P.E., KMS Associates, Inc. (August 7, 2018)
Klein Circle Dr., Houston, TX Parking: Signage for a van accessible parking space is not provided (1991 ADA Stds 4.6.4; 2010 ADA Stds 502.6)....
-
11B-604.5.2 Rear wall
Exceptions: The rear grab bar shall be permitted to be 24 inches (610 mm) long minimum, centered on the water closet, where wall space does not permit a length of 36 inches (914 mm...
-
§ 36.406(e)(1)
accessible sleeping rooms with mobility features (including suites and clustered sleeping rooms) or on floors containing accessible sleeping rooms with mobility features shall provide turning spaces...
-
Sections 4.2 Through 4.35 (Preamble, Section-by-Section Analysis)
• Sections 4.2 Through 4.35 Sections 4.2 through 4.35 contain the technical specifications for elements and spaces required to be accessible by the scoping provisions (sections 4.1 through...
-
1003.3 Clearances
Although the minimum width of the clear pier space is 60 inches (1525 mm), it is recommended that piers be wider than 60 inches (1525 mm) to improve the safety for persons with disabilities...
-
306.3.3 Minimum Required Depth
Where knee clearance is required under an element as part of a clear floor space, the knee clearance shall be 11 inches (280 mm) deep minimum at 9 inches (230 mm) above the finish floor...
-
F230.1 General
This requirement applies to facilities such as office buildings, courthouses, and other facilities where admittance to the building or restricted spaces is dependent on two-way communication...
-
306.3.3 Minimum Required Depth
Where knee clearance is required under an element as part of a clear floor space, the knee clearance shall be 11 inches (280 mm) deep minimum at 9 inches (230 mm) above the finish floor...
-
230.1 General
This requirement applies to facilities such as office buildings, courthouses, and other facilities where admittance to the building or restricted spaces is dependent on two-way communication...
-
11. Toilet rooms and bathing facilities
Accessible element or space ANSI A117.1 section APPLICATION 11....
-
806.2 Guest Rooms with Mobility Features
The requirements in 806.2 do not include requirements that are common to all accessible spaces....
-
R304.3.2 Running Slope
The running slope of the turning space shall be 2 percent maximum....
-
306.3.3 Minimum Required Depth
Where knee clearance is required under an element as part of a clear floor space, the knee clearance shall be 11 inches (280 mm) deep minimum at 9 inches (230 mm) above the finish floor...
-
306.3.3 Minimum Required Depth
Where knee clearance is required under an element as part of a clear floor space, the knee clearance shall be 11 inches (280 mm) deep minimum at 9 inches (230 mm) above the finish floor...
-
Common Use Circulation Paths in Employee Work Areas [§206.2.8]
This requirement facilitates access to individual work stations within a space. Common Use Circulation Paths...
-
Additions [§202.2]
Existing elements and spaces affected by an addition are treated as alterations and qualify for certain allowances or exceptions that are not permitted in new construction....