• Building Blocks • Accessible Routes • General Site and Building Elements • Plumbing Elements and Facilities • Communication Elements and Features • Special Rooms, Spaces...
Search Results "Shower Clear Floor Space"
Filters
Commonly Searched Documents
-
CalCasp Training: 2016 California Building Code Chapter 11B
-
3.10 Cinemark 22, 2600 West Avenue I, Lancaster, California
3.10 Cinemark 22 2600 West Avenue I, Lancaster, California - In Auditorium 10, the four (4) wheelchair spaces shall be located one row further back in the auditorium from their current...
-
3.8 Cinemark at Valley View, 6001 Canal Road, Valley View, Ohio
3.8 Cinemark at Valley View 6001 Canal Road, Valley View, Ohio - In Auditorium 15, the four (4) wheelchair spaces shall be relocated one row farther back in the auditorium from their...
-
11B-226.2 Dispersion
Dining surfaces required to comply with Section 11B-902 shall be dispersed throughout the space or facility containing dining surfaces for each type of seating in a functional area....
-
F202.2.1 Accessible Route
At least one accessible route shall be provided within the site from accessible parking spaces and accessible passenger loading zones; public streets and sidewalks; and public transportation...
-
F208.3.1 General
Parking spaces complying with 502 that serve a particular building or facility shall be located on the shortest accessible route from parking to an entrance complying with F206.4....
-
11B-226.2 Dispersion
Dining surfaces required to comply with Section 11B-902 shall be dispersed throughout the space or facility containing dining surfaces for each type of seating in a functional area....
-
11B-226.2 Dispersion
Dining surfaces required to comply with Section 11B-902 shall be dispersed throughout the space or facility containing dining surfaces for each type of seating in a functional area....
-
11B-406.6 Islands
The clear width of the accessible route at islands shall be 60 inches (1524 mm) wide minimum. Where curb ramps are provided, they shall comply with Section 11B-406....
-
Security Bollards [7.4] and Security Devices
Security Bollards [7.4] and Security Devices Bollards and rails used to keep shopping carts on the premises must allow an accessible clear passage (32 inches wide minimum) along at least...
-
4.8.4 LANDINGS
(2) The landing length shall be a minimum of 60 in (1525 mm) clear....
-
ETA Opinion: ADA Signage at Exit Doors
This comes from an interpretation of the wording in ADAAG §4.1.3(16)(a) which states: "Signs which designate permanent rooms and spaces shall comply with 4.30.1, 4.30.4, 4.30.5 and 4.30.6...
-
T504.1 General
Passenger access routes shall provide clearances that are sufficient to permit passengers using wheelchairs to move between wheelchair spaces and doorways that provide accessible boarding...
-
Side Approach
Sinks located in corners may not be fully within reach and the space to the rear of the side approach space cannot be reached....
-
Rockwood Manufacturing Company 604 Door Guard - Solid Cast Brass
Material: Solid Cast Brass Options: 1/8" clear plastic shim - order separately as 604 SHIM....
-
Cavity Sliders USA Inc. Wall Mount Track
Standard stocked finishes available: Clear or Bronze Anodized. Please inquire about custom colors....
-
Tile Tech Pavers® Porcelain Pavers™ Series
Until recently, porcelain pavers have mostly been used for traditional interior tiling purposes on both floors and walls....
-
Wilkinson Hi-Rise Trash Chute
The floor frames of the chute are typically equipped with sound isolator pads at each floor connection point to isolate the chute from the floor of the structure....
-
SHOPPING CENTER (OR SHOPPING MALL)
A shopping center may include a series of buildings on a common site, connected by a common pedestrian access route on, above or below the ground floor, that is either under common ownership...
-
Check-in:
Be specific about your needs, for example, I would like a room on the ground floor, I use a motorized wheelchair and will need assistance in an emergency evacuation, or I use a motorized...
-
604.8.3 Coat Hooks and Shelves
Shelves shall be located 40 inches (1015 mm) minimum and 48 inches (1220 mm) maximum above the finish floor. [ECTCR UFAS 4.25.3, Fig. 38, 4.23.9, 4.34.5.3(3)]...
-
11B-804.3.2 Height
The kitchen work surface shall be 34 inches (864 mm) maximum above the finish floor or ground....
