section proposes to require that, where stationary ICT provides one or more display screens, at least one of each type of screen must be visible from a point located 40 inches above the floor...
Search Results "Floor Designation"
Filters
Commonly Searched Documents
-
408.1 General (Section-by-Section Analysis)
-
Audio Induction Loop
The loop may surround all or part of a room and can be permanently installed in the ceiling, floor or walls of a room. Portable systems are also available....
-
TABLE OF CONTENTS
Buildings: Alterations. 4.1.7 Accessible Buildings: Historic Preservation 4.2 Space Allowance and Reach Ranges 4.3 Accessible Route 4.4 Protruding Objects 4.5 Ground and Floor...
-
PATH OF TRAVEL
(2) An accessible path of travel may consist of walks and sidewalks, curb ramps and other interior or exterior pedestrian ramps; clear floor paths through lobbies, corridors, rooms...
-
1009.3 Stairways
means of egress, a stairway between stories shall have a clear width of 48 inches (1219 mm) minimum between handrails and shall either incorporate an area of refuge within an enlarged floor-level...
-
501.1 Scope (Section-by-Section Analysis)
Exception 2 proposes that software that (1) is assistive technology and (2) supports the accessibility services of the platform for which it is designed need not conform with the provisions...
-
Feature 1 - Parking and Passenger Drop-Off Areas
ADA Standards for Accessible Design | Temporary Barrier Removal Suggestions for Accessible Features...
-
MAKING THE BUILT ENVIRONMENT ACCESSIBLE
The ADA’s regulations and the ADA Standards for Accessible Design, originally published in 1991, set the standard for what makes a facility accessible....
-
New Construction and Alterations
The 2010 Standards lay out accessibility design requirements for newly constructed and altered public accommodations and commercial facilities....
-
Section 35.151(g)(2)
This rule, which is designed to prevent a public entity from placing wheelchair spaces and companion seats on one side of the facility only, is consistent with the Department’s enforcement...
-
11B-221.2.1.3 Other boxes
The provision for seating in "other boxes" includes box seating provided in facilities such as performing arts auditoria where tiered boxes are designed for spatial and acoustical purposes...
-
Public Building
Federal agencies or mixed-ownership corporations, such as Federal office buildings, post offices, customhouses, courthouses, border inspection facilities, warehouses, and any such building designated...
-
3. Emergency Transportable Housing
Emergency transportable housing units, which are designed and manufactured for transport over roadways, have a smaller footprint than other types of housing and pose unique accessibility...
-
F206.2.5 Restaurants and Cafeterias
Examples of "same decor" include, but are not limited to, seating at or near windows and railings with views, areas designed with a certain theme, party and banquet rooms, and rooms where...
-
3. Emergency Transportable Housing
Emergency transportable housing units, which are designed and manufactured for transport over roadways, have a smaller footprint than other types of housing and pose unique accessibility...
-
3.3 Data Sources
Access Board staff and some Committee members brought pertinent existing accessibility standards, such as the 2010 ADA Standards for Accessible Design, to the attention of the full Committee...
-
F240.1.1 Additions
Where play areas are designed and constructed in phases, the requirements of F240 shall apply to each successive addition so that when the addition is completed, the entire play area complies...
-
What other voting rights laws does the Justice Department enforce?
The Help America Vote Act of 2002 (42 U.S.C. 15301 to 15545) is designed to improve the administration of elections in the United States by establishing minimum standards for states to follow...
-
5.8.1 Wheelchair Spaces on Raised Platforms Recommendations
provisions allow patients who use wheelchairs to position their devices at equipment typically used in a standing position such as mammography equipment, and applies to equipment specifically designed...
-
Utility and Sewage Hookups [1011.2, 1011.3, and 1011.6]
The clear ground space must be designed so that the hookups are located at the rear center of the space....
-
Summary
User testing is recommended for arriving at more accurate transfer surface dimensions and design features to insure usability for a broad diversity of users, including individuals with mobility...
-
M305.2 Transfer Supports
Possible language as modified from IEC 60601-2-52: “Transfer Supports shall be designed to withstand the forces applied during reasonably foreseeable use without creating an unacceptable...
-
R302.7.1 Vertical Alignment
Surfaces should be designed, constructed, and maintained according to appropriate industry standards, specifications, and recommendations for best practice....
-
Scenario 10 – Procedural Safeguards
A school district is required to establish, implement, and inform parents about a system of procedural safeguards that are designed to help resolve FAPE-related disagreements regarding identification...