The radius of curvature at the leading edge of the tread shall be ½ inch (12.7 mm) maximum....
Search Results "Shall"
-
11B-504.5 Nosings
-
11B-405.8 Handrails
Ramp runs shall have handrails complying with Section 11B-505. [2010 ADA Standards] 405.8 Handrails....
-
11B-604.3.1 Size
Clearance around a water closet shall be 60 inches (1524 mm) minimum measured perpendicular from the side wall and 56 inches (1422 mm) minimum measured perpendicular from the rear wall....
-
1117B.5.7
Where permanent identification signs are provided for rooms and spaces, signs shall be installed on the wall adjacent to the latch side of the door....
-
232.2.1 Cells with Mobility Features
At least 2 percent, but no fewer than one, of the total number of cells in a facility shall provide mobility features complying with 807.2. Exception: 1....
-
Circulation Paths
paths shall comply with 4.4. 4.4.1* General....
-
11B-704.3 Volume control telephones
An automatic reset shall be provided. Volume control telephones shall be equipped with a receiver that generates a magnetic field in the area of the receiver cap....
-
11B-224.8.2 More than 50-bed facilities
Facilities with more than 50 beds that provide common use bathing facilities, shall provide at least one roll-in shower with a seat that complies with Section 11B-608....
-
D. TERMS OF AGREEMENT
The Museum shall not discriminate against individuals with disabilities on the basis of disability in the full and equal enjoyment of its goods, services, and facilities. 42 U.S.C. § 12182...
-
§8.25(c) Existing public housing and multi-family Indian housing—needs assessment and transition plan
The PHA shall complete structural changes necessary to achieve program accessibility as soon as possible but in any event no later than four years after July 11, 1988....
-
217.4.3.1 Public Buildings
Where at least one public pay telephone is provided in a public building, at least one public TTY shall be provided in the building....
-
11B-610.3.1 Rectangular seats
The rear edge of a rectangular seat shall be 2½ inches (64 mm) maximum and the front edge 15 inches (381 mm) minimum and 16 inches (406 mm) maximum from the seat wall....
-
3.3 Lexington Woodhill Movies 10, 425 Codell Drive Lexington, Kentucky
3.3 Lexington Woodhill Movies 10 425 Codell Drive Lexington, Kentucky - In Auditoria 3 and 10, the four (4) wheelchair spaces shall be relocated one row farther back in the auditorium...
-
[A] 101.4.3 Plumbing
The provisions of the California Plumbing Code shall apply to the installation, alteration, repair and replacement of plumbing systems, including equipment, appliances, fixtures, fittings...
-
11B-604.8.3 Coat hooks and shelves
Coat hooks shall be located within one of the reach ranges specified in Section 11B-308....
-
11B-231.3.1 Central holding cells
Where separate central holding cells are provided for adult male, juvenile male, adult female, or juvenile female, one of each type shall comply with Section 11B-807.2 _|Cells with Mobility...
-
11B-902.4 Dining surfaces and work surfaces for children’s use
Accessible dining surfaces and work surfaces for children’s use shall comply with Section 11B-902.4....
-
11B-203.12 Animal containment areas
Animal containment areas that are not for public use shall not be required to comply with these requirements or to be on an accessible route....
-
11B-307.3.1 Edges and corners
Where signs or other objects are mounted on posts or pylons, and their bottom edges are less than 80 inches (2032 mm) above the floor or ground surface, the edges of such signs and objects shall...
-
610.3.1 Rectangular Seats
The rear edge of a rectangular seat shall be 2½ inches (64 mm) maximum and the front edge 15 inches (380 mm) minimum and 16 inches (405 mm) maximum from the seat wall....
-
F222.2 Coat Hooks and Shelves
Where coat hooks or shelves are provided in dressing, fitting or locker rooms without individual compartments, at least one of each type shall comply with 803.5....
-
233.3.1 Minimum Number: New Construction
Newly constructed facilities with residential dwelling units shall comply with 233.3.1....
-
203.2 Construction Sites
sites directly associated with the actual processes of construction, including but not limited to, scaffolding, bridging, materials hoists, materials storage, and construction trailers shall...
-
404.3.6 Break Out Opening
Where doors and gates without standby power are a part of a means of egress, the clear break out opening at swinging or sliding doors and gates shall be 32 inches (815 mm) minimum when operated...