Where components of diagnostic equipment are used to examine specific body parts, the components shall be capable of examining the body parts of a patient seated in a wheelchair....
Search Results "Wheelchair Location"
Filters
Commonly Searched Documents
-
M303.4 Components
-
M303.4 Components
Where components of diagnostic equipment are used to examine specific body parts, the components shall be capable of examining the body parts of a patient seated in a wheelchair....
-
703.4 Installation Height and Location
Signs with tactile characters shall comply with 703.4.
-
703.4 Installation Height and Location
Signs with tactile characters shall comply with 703.4.
-
11B-802 Wheelchair spaces, companion seats, and designated aisle seats and semi-ambulant seats
[2010 ADAS] 802 Wheelchair Spaces, Companion Seats, and Designated Aisle Seats...
-
"Other Power-Driven Mobility Device" and "Wheelchair" (Section-by-Section Analysis)
‘‘Other Power-Driven Mobility Device'' and ‘‘Wheelchair'' (Section-by-Section Analysis) Because relatively few individuals with disabilities were using nontraditional mobility devices...
-
Freedom Trax Video 2
Freedom Trax is a powered track attachment for manual wheelchairs. It is designed to be the convenient and portable solution to off-road mobility....
-
Can accessible spaces be parallel instead of perpendicular?
The Standards do not specifically require that accessible spaces be perpendicular instead of parallel, but perpendicular parking spaces are preferred at facilities located on sites because...
-
Freedom Trax Outdoor Video
Freedom Trax is the only powered track attachment for manual wheelchairs. It's your portable and convenient solution to off road mobility....
-
M303.3.1 Vertical (Section-by-Section Analysis)
The MDE NPRM proposed that for equipment with a change in level at the entry to the wheelchair space, level changes of up to ¼ inch high are permitted to be vertical....
-
Slope: ADA Standard Section 1002.4.2
The floor or ground surface of wheelchair spaces shall have a slope not steeper than 1:48 when in the load and unload position....
-
11B-1002.4.2 Slope
The floor or ground surface of wheelchair spaces shall have a slope not steeper than 1:48 when in the load and unload position....
-
Executive Summary
Executive Summary Standards for accessible design include requirements based on the anthropometry of wheeled mobility users. Key requirements apply to clear floor area, reach...
-
Emergency Egress
Emergency Egress ADAAG requires that accessible seating be located on an accessible route which also serves as a means of egress....
-
Section 36.406(f)(3)
In the NPRM, the Department proposed Sec. 36.406(f)(2), which prohibits wheelchair spaces and companion seating locations from being “located on (or obstructed by) temporary platforms *...
-
Vehicle Parking
Because new recreation site locations should be chosen carefully to ensure accessibility requirements can be met, this exception should hardly ever be taken....
-
M303.3.2 Beveled (Section-by-Section Analysis)
The MDE NPRM proposed that for equipment with a change in level at the entry to the wheelchair space, level changes greater than ¼ inch but not greater than ½ inch would be required to be...
-
§ 35.138(b)(1)
(1) Inform individuals with disabilities, their companions, and third parties purchasing tickets for accessible seating on behalf of individuals with disabilities of the locations of all...
-
10.3.1(4)
Such signs shall be placed in uniform locations at entrances within the transit system to the maximum extent practicable....
-
Wheelchair Space or Transfer Seat or Transfer Device
Wheelchair Space or Transfer Seat or Transfer Device....
-
607.4.1.1 Back Wall
Two grab bars shall be installed on the back wall, one located in accordance with 609.4 and the other located 8 inches (205 mm) minimum and 10 inches (255 mm) maximum above the rim of the...
-
Sight Lines
Some conventions, such as the average eye level height of a seated adult is within the accepted range for people seated in wheelchairs....
-
11B-607.4.1.1 Back wall
Two grab bars shall be installed on the back wall, one located in accordance with Section 11B-609.4 and the other located 8 inches (203 mm) minimum and 10 inches (254 mm) maximum above the...
-
11B-607.4.1.1 Back wall
Two grab bars shall be installed on the back wall, one located in accordance with Section 11B-609.4 and the other located 8 inches (203 mm) minimum and 10 inches (254 mm) maximum above the...
