5.1 Costs Included: For the purposes of 11B-202.4, the adjusted construction cost for a project shall include: • All direct or "hard" costs directly associated with the contractor’s construction...
Search Results "Capital Construction Cost"
Filters
Commonly Searched Documents
-
5.1 Costs Included
-
Americans with Disabilities Act (ADA) Standards for Transportation Facilities
Department of Transportation in 2006 for public transportation facilities covered by the ADA in new construction and alterations....
-
3.4.8 Viewing Areas Accessed by Vehicular Ways
The outdoor recreation access route shall connect the distinct viewing locations, accessible outdoor constructed elements, and other accessible elements, accessible spaces, and accessible...
-
Compliance Dates
Compliance Dates On or after March 15, 2012 All newly constructed or altered facilities of public entities and public accommodations, including pools, must comply with the 2010 Standards...
-
Planning and Designing Outdoor Recreation Facilities for Horses
"Equestrian Design Guidebook for Trails, Trailheads, and Campgrounds," a comprehensive technical resource, details those elements of planning, design, and construction that are specific...
-
7.4.10.2 Outdoor Recreation Access Routes (ORARs)
section 2.0 shall connect the following places at trailheads: Accessible parking spaces or other arrival point; Starting point of the trail; and Accessible outdoor constructed...
-
Husky 24" Line Generator Digital Laser Level
It is great for checking floors, walls and ceilings during construction....
-
1011.6 Water Spouts
Water spouts at water hydrants and water utility hook-ups shall be 28 inches (710 mm) minimum and 36 inches (915 mm) maximum above the ground.
-
1011.6 Water Spouts
Water spouts at water hydrants and water utility hook-ups shall be 28 inches (710 mm) minimum and 36 inches (915 mm) maximum above the ground.
-
1.1.10 Ramps
1.1.10 Ramps. Measure accessible ramps for overall running slope and cross slope as well as local running slope and cross slope variations (flatness) in accordance with Sections...
-
1.1.14 Flatness of ramp cross slope
1.1.14 Flatness of ramp cross slope. For ramps, measure flatness of cross slope by placing a 24 - in. (600 mm) digital inclinometer perpendicular to the line of travel at 4 ft (1200...
-
1.1.16 Alternate measurement tools
1.1.16 Alternate measurement tools. Ramps may be measured with instruments other than a digital inclinometer if they provide the data required for evaluation of tolerances as given...
-
1.1.6 Flatness of walk cross slope
1.1.6 Flatness of walk cross slope. For walks and other pedestrian paths, measure flatness of the cross slope by placing a 24 - in. (600 mm) digital inclinometer perpendicular to the...
-
ALTERATION
Any construction or renovation to an existing structure other than repair or addition....
-
Kompan, Inc. M243P - Crocodile Bench
Requires the Premium User plan or above. (Login or upgrade your account!) -
II. GENERAL NONDISCRIMINATION REQUIREMENTS
Failing or refusing to design and construct QuikTrip Stores that are readily accessible to and usable by individuals with disabilities in full compliance with 42 U.S.C. § 12183(a)(1), 28...
-
Facility
Facilities must comply with all 2010 ADA Standards for Accessible Design for new construction and remodeling projects....
-
Costs and Benefits
The Initial RA provides estimates of the total costs for two options. ...
-
Costs of Adaptation
All costs associated with incorporating the new design and construction requirements of the Fair Housing Act are borne by the builder....
-
11B-809.8 Doors
Exterior landings of impervious construction (e.g., concrete, brick, flagstone) serving primary entry doors and required exit doors are limited to not more than 1/2 inch (12.7 mm) of change...
-
3. If I comply with the California accessibility requirements, am I in compliance with ADA?
Remember that the accessibility requirements are reviewed by the building department only when a project is submitted for permit (meaning when you design, construct, alter, remodel, add,...
-
Stabilized Engineered Wood Fiber for Accessible Trails
The stabilized EWF (SEWF) system enhanced accessibility and should reduce erosion and maintenance costs for trail systems....
-
DSA IR 11B-8 - USE OF PREDETERMINED CONSTRUCTION TOLERANCE GUIDELINES FOR ACCESSIBILITY (with revisions issued through Jan. 2011)
Interpretation of Regulations Document IR 11B-8 USE OF PREDETERMINED CONSTRUCTION TOLERANCE GUIDELINES FOR ACCESSIBILITY References: 2007/2010 California Building Code, Section...
