At least one side partition shall provide a toe clearance of 9 inches (229 mm) minimum above the finish floor and 6 inches (152 mm) deep minimum beyond the compartment-side face of...
Search Results "Beach Wheelchair"
-
11B-604.8.1.4 Toe clearance
-
11B-604.8.1.4 Toe clearance
At least one side partition shall provide a toe clearance of 9 inches (229 mm) minimum above the finish floor and 6 inches (152 mm) deep minimum beyond the compartment-side face of...
-
M303.2.6 Edge Protection
Where wheelchair spaces are provided on a platform raised more than 1 ½ inches (38 mm) in height, edge protection 2 inches (51 mm) high minimum measured from the surface of the platform...
-
802.1.5 Overlap
Wheelchair spaces shall not overlap circulation paths. Advisory 802.1.5 Overlap....
-
11B-802.1.5 Overlap
Wheelchair spaces shall not overlap circulation paths. [2010 ADAS] Advisory 802.1.5 Overlap. ...
-
802.1.5 Overlap
Wheelchair spaces shall not overlap circulation paths. Advisory 802.1.5 Overlap....
-
802.1.5 Overlap
Wheelchair spaces shall not overlap circulation paths. Advisory 802.1.5 Overlap....
-
11B-802.1.5 Overlap
Wheelchair spaces shall not overlap circulation paths. [2010 ADAS] Advisory 802.1.5 Overlap....
-
11B-802.1.5 Overlap
Wheelchair spaces shall not overlap circulation paths. Advisory 11B-802.1.5 Overlap....
-
6.2
6.2 Wheelchair spaces and their companion seats shall be located on a riser....
-
Common Problems with New Construction and Alterations
People who use wheelchairs, scooters, crutches, and other with mobility aids often find that both newer and older city and county facilities have parking, routes to and through buildings...
-
Key Differences Between Routes
Beach Access Routes—A beach access route is a continuous, unobstructed path that crosses the surface of the beach to allow pedestrians to play, swim, or participate in other beach-, shoreline...
-
Floor or Ground Surface: ADA Standard Section 1002.4.1
The floor or ground surface of wheelchair spaces shall be stable and firm....
-
11B-1002.4.1 Floor or ground surface
The floor or ground surface of wheelchair spaces shall be stable and firm....
-
11B-1002.4.1 Floor or ground surface
The floor or ground surface of wheelchair spaces shall be stable and firm....
-
T603.3 Design Load
Wheelchair securement systems shall comply with the design loads specified in T603.3.1 or T603.3.2, as applicable....
-
1009.7.1 Size
Each exterior area for assisted rescue shall be sized to accommodate wheelchair spaces in accordance with Section 1009.6.3....
-
1009.7.1 Size
Each exterior area for assisted rescue shall be sized to accommodate wheelchair spaces in accordance with Section 1009.6.3....
-
Section 36.406(f)(1)
Section 36.406(f)(1) ensures that there is greater dispersion of wheelchair spaces and companion seats throughout stadiums, arenas, and grandstands than would otherwise be required by sections...
-
Section 36.406(f)(2)
Section 36.406(f)(2) now requires an assembly area that has seating encircling, in whole or in part, a field of play or performance area, such as an arena or stadium, to place wheelchair...
-
Section 35.151(g)(1)
Section 35.151(g)(1) ensures that there is greater dispersion of wheelchair spaces and companion seats throughout stadiums, arenas, and grandstands than would otherwise be required by sections...
-
1007.7.3 Size
Each exterior area for assisted rescue shall be sized to accommodate wheelchair spaces in accordance with Section 1007.6.1....
-
§ 38.179 Trams, and similar vehicles, and systems
[See subsections ...]
-
G. Chapter 6: Wheelchair Spaces and Securement Systems
Chapter 6 in the 2016 Non-Rail Vehicle Guidelines establishes technical requirements for wheelchair spaces, wheelchair securement systems, and seat belts and shoulder belts provided for...