(b) The boarding or deplaning process occurs at a foreign airport;...
Search Results "Airport Gate"
-
§382.101(b)
-
§27.72(a)
(a) This section applies to airports with 10,000 or more annual enplanements....
-
Doors in a Series
Section 404.2.6 specifies the minimum separation between doors and gates in series (48 inches plus the width of doors or gates swinging into the space)....
-
General: ADA Standard Section 707.1
Place accessible gates and fare vending machines in close proximity to other accessible elements when feasible so the facility is easier to use....
-
11B-410.8 Restriction sign
This section includes requirements which address platform size and gate configurations for lifts with 90-degree egress, and additionally requires signs posted at the landings as follows:...
-
11B-410.8 Restriction sign
This section includes requirements which address platform size and gate configurations for lifts with 90-degree egress, and additionally requires signs posted at the landings as follows:...
-
382.95 What are carriers’ general obligations with respect to boarding and deplaning assistance?
This obligation exists at both U.S. and foreign airports....
-
Other Comments on the Technical Standard
Other Comments on the Technical Standard Several disability organizations' comments urged the Department to require carriers and airports to consult with individuals with disabilities...
-
382.93 Must carriers offer preboarding to passengers with a disability?
Carrier must offer an opportunity for preboarding to passengers with a disability who self-identify at the gate as needing additional time or assistance to board, stow accessibility equipment...
-
Smooth Surface
Section 404.2.10 requires that swinging doors and gates have a smooth surface on the push side that extends their full width....
-
382.151 What are the requirements for providing Complaints Resolution Officials?
U.S. carriers must make a CRO available – either in person or via telephone – at each airport the carrier serves, at all times the carrier is operating at the airport....
-
382.7 To whom do the provisions of this Part apply?
Finally, a charter flight on a foreign carrier from a foreign airport to a U.S. airport and back would not be covered if the carrier did not pick up any passengers in the U.S....
-
11B-217.1 General
These requirements apply to all types of public telephones including courtesy phones at airports and rail stations that provide a free direct connection to hotels, transportation services...
-
11B-217.1 General
These requirements apply to all types of public telephones including courtesy phones at airports and rail stations that provide a free direct connection to hotels, transportation services...
-
§27.71(h)(4)(ii)
(ii) Airports shall meet the requirements of this section August 4, 2016....
-
1132A.9 Smooth surface
Swinging door or gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
1132A.9 Smooth surface
Swinging door or gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
Symmetry Vertical Platform Lift VPC-SL
another floor Upper final limit Platform Sizes : 36” W x 48” D 36” W x 54” D 36” W x 60” D 42” W x 60” D Vertical Platform Lift Gate...
-
Automatic Doors
Section 404.3 addresses automatic doors and gates, including those that are full-powered, low-energy, and power-assisted....
-
§ 382.40 Boarding assistance for small aircraft
(c) (1) Each carrier shall negotiate in good faith with the airport operator at each airport concerning the acquisition and use of boarding assistance devices....
-
11B-404.2.4 Maneuvering clearances
Minimum maneuvering clearances at doors and gates shall comply with Section 11B-404.2.4....
-
11B-404.2.4 Maneuvering clearances
Minimum maneuvering clearances at doors and gates shall comply with Section 11B-404.2.4....
-
1132A.9 Smooth surface
Swinging door or gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
410 Platform Lifts
Section 410 provides requirements for platform lifts and addresses floor surfaces, clear floor space, operable parts, and doors and gates....
