(a) This section applies to airports with 10,000 or more annual enplanements....
Search Results "Airport Gate"
-
§27.72(a)
-
Doors in a Series
Section 404.2.6 specifies the minimum separation between doors and gates in series (48 inches plus the width of doors or gates swinging into the space)....
-
General: ADA Standard Section 707.1
Place accessible gates and fare vending machines in close proximity to other accessible elements when feasible so the facility is easier to use....
-
11B-410.8 Restriction sign
This section includes requirements which address platform size and gate configurations for lifts with 90-degree egress, and additionally requires signs posted at the landings as follows:...
-
11B-410.8 Restriction sign
This section includes requirements which address platform size and gate configurations for lifts with 90-degree egress, and additionally requires signs posted at the landings as follows:...
-
382.95 What are carriers’ general obligations with respect to boarding and deplaning assistance?
This obligation exists at both U.S. and foreign airports....
-
Other Comments on the Technical Standard
Other Comments on the Technical Standard Several disability organizations' comments urged the Department to require carriers and airports to consult with individuals with disabilities...
-
382.93 Must carriers offer preboarding to passengers with a disability?
Carrier must offer an opportunity for preboarding to passengers with a disability who self-identify at the gate as needing additional time or assistance to board, stow accessibility equipment...
-
Smooth Surface
Section 404.2.10 requires that swinging doors and gates have a smooth surface on the push side that extends their full width....
-
382.151 What are the requirements for providing Complaints Resolution Officials?
U.S. carriers must make a CRO available – either in person or via telephone – at each airport the carrier serves, at all times the carrier is operating at the airport....
-
382.7 To whom do the provisions of this Part apply?
Finally, a charter flight on a foreign carrier from a foreign airport to a U.S. airport and back would not be covered if the carrier did not pick up any passengers in the U.S....
-
Symmetry Vertical Platform Lift VPC-SL
another floor Upper final limit Platform Sizes : 36” W x 48” D 36” W x 54” D 36” W x 60” D 42” W x 60” D Vertical Platform Lift Gate...
-
11B-217.1 General
These requirements apply to all types of public telephones including courtesy phones at airports and rail stations that provide a free direct connection to hotels, transportation services...
-
11B-217.1 General
These requirements apply to all types of public telephones including courtesy phones at airports and rail stations that provide a free direct connection to hotels, transportation services...
-
§27.71(h)(4)(ii)
(ii) Airports shall meet the requirements of this section August 4, 2016....
-
1132A.9 Smooth surface
Swinging door or gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
1132A.9 Smooth surface
Swinging door or gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
Automatic Doors
Section 404.3 addresses automatic doors and gates, including those that are full-powered, low-energy, and power-assisted....
-
§ 382.40 Boarding assistance for small aircraft
(c) (1) Each carrier shall negotiate in good faith with the airport operator at each airport concerning the acquisition and use of boarding assistance devices....
-
11B-404.2.4 Maneuvering clearances
Minimum maneuvering clearances at doors and gates shall comply with Section 11B-404.2.4....
-
11B-404.2.4 Maneuvering clearances
Minimum maneuvering clearances at doors and gates shall comply with Section 11B-404.2.4....
-
1132A.9 Smooth surface
Swinging door or gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
410 Platform Lifts
Section 410 provides requirements for platform lifts and addresses floor surfaces, clear floor space, operable parts, and doors and gates....
-
11B-404.2.8.2 Spring hinges
Door and gate spring hinges shall be adjusted so that from the open position of 70 degrees, the door or gate shall move to the closed position in 1.5 seconds minimum....
