Revolving doors shall not be part of an accessible route required by Section 1009 and Chapter 11A or 11B....
Search Results "Supplemental Requirement"
-
1010.1.4.1 Revolving doors
-
11B-201.2 Application based on building or facility use
Where a site, building, facility, room, or space contains more than one use, each portion shall comply with the applicable requirements for that use....
-
1013.4, Item 1
Each grade-level exterior exit door that is required to comply with Section 1013.1 shall be identified by a tactile exit sign with the word, “EXIT.”...
-
1133A.4.1, Item 1
Sinks and work surfaces required by Section 1133A.4 shall be designed to enable repositioning to a minimum height of 28 inches (711 mm)....
-
§ 35.102(b)
(b) To the extent that public transportation services, programs, and activities of public entities are covered by subtitle B of title II of the ADA, they are not subject to the requirements...
-
11B-505.2.1 Orientation
The orientation of at least one handrail shall be in the direction of the stair run, perpendicular to the direction of the stair nosing, and shall not reduce the minimum required width of...
-
11B-606.7 Sink depth
Where a forward approach is required at a sink, knee and toe clearance shall be provided in compliance with Section 11B-306....
-
§ 37.127(a)
(a) Each public entity required to provide complementary paratransit service under §37.121 of this part shall make the service available to visitors as provided in this section....
-
§ 37.139(g)
(g) Efforts to coordinate service with other entities subject to the complementary paratransit requirements of this part which have overlapping or contiguous service areas or jurisdictions...
-
§ 37.167(e)
(e) The entity shall ensure that vehicle operators and other personnel make use of accessibility-related equipment or features required by part 38 of this title....
-
11B-812.8.1 Four or fewer
Where four or fewer total EVCS are provided, identification with an International Symbol of Accessibility (ISA) and signs identifying van accessible spaces shall not be required....
-
11B-804.6.5.1 Side-hinged door ovens
Side-hinged door ovens shall have the work surface required by Section 11B-804.3 positioned adjacent to the latch side of the oven door....
-
412.2.6 Accessibility
[DSA-AC] In air traffic control towers, an accessible route shall not be required to serve the cab and the equipment areas on the floor immediately below the cab....
-
11B-812.6.3 Ambulatory
Vehicle spaces serving ambulatory EVCS shall be 120 inches (3048 mm) wide minimum and shall not be required to have an adjacent access aisle....
-
11B-505.2.1 Orientation
The orientation of at least one handrail shall be in the direction of the stair run, perpendicular to the direction of the stair nosing, and shall not reduce the minimum required width of...
-
[ADA Title III §36.104] 2004 ADAAG
[ADA Title III §36.104] 2004 ADAAG means the requirements set forth in appendices B and D to 36 CFR part 1191 (2009)....
-
[ADA Title II §35.104] 2004 ADAAG
[ADA Title II §35.104] 2004 ADAAG means the requirements set forth in appendices B and D to 36 CFR part 1191 (2009)....
-
11B-201.2 Application based on building or facility use
Where a site, building, facility, room, or space contains more than one use, each portion shall comply with the applicable requirements for that use....
-
11B-804.6.5.1 Side-hinged door ovens
Side-hinged door ovens shall have the work surface required by Section 11B-804.3 positioned adjacent to the latch side of the oven door....
-
Retrofitting Kiosks
Retrofitting Kiosks The SNPRM: In proposing to require that only new kiosks ordered after a certain date be accessible, we had also considered proposing to require carriers to either...
-
Accessible golf cars.
with no greater advance notice than that required of other golfers. ...
-
Slopes and Resting Intervals for Outdoor Recreation Access Routes
Complying with the grade requirement in these areas may be difficult without a fundamental change to the recreation environment....
-
Accessibility - Flatness and Lippage
For any application, a tiled floor should comply with the flatness requirements in ANSI A108.02: "no variations exceeding 1/4" in 10 feet from the required plane."...
-
302.3 Without Perception of Color (Section-by-Section Analysis)
Section 302.3 would require at least one mode of operation that does not require user perception of color where a visual mode of operation is provided....