________________________________________ ...with the exception of guestrooms not designated as accessible, does at least one door to each accessible space have at least 18" of clear floor...
Search Results "Extended Floor Surface"
Commonly Searched Documents
-
C. Doors
-
11B-604.6 Flush controls
Hand operated flush controls shall comply with Section 11B-309 except they shall be located 44 inches (1118 mm) maximum above the floor....
-
Character Height [4.30.3]
is also available from the CABO/ANSI A117.1โ1992 standard which recommends heights based on the mounting height (1 inch minimum height for signs mounted from 48 to 60 inches above the floor...
-
III-7.7000 Alterations
Entities are permitted to -- (a) Install only one accessible unisex bathroom per floor; (b) Cluster wheelchair seating in altered assembly areas; (c) Use platform lifts as part...
-
Creating a Workable ADA: The Senate and the White House
On August 2, the Senate Committee on Labor and Human Resources voted unanimously to report the ADA, as amended, to the Senate floor....
-
Technical Infeasibility
design solutions are not feasible; or work that would impact load-bearing walls and other essential components of the structural frame, including structural reinforcement of the floor...
-
E. Restaurants and Concessions:
PSE shall make alterations and additions to all dining counters so that at least five (5) percent of the seating and standing spaces at the counter provide a clear floor space positioned...
-
ยง 38.77(c)
Vertical stanchions from ceiling to floor shall not interfere with wheelchair or mobility aid circulation and shall be kept to a minimum in the vicinity of accessible doors....
-
11B-604.6 Flush controls
Hand operated flush controls shall comply with Section 11B-309 except they shall be located 44 inches (1118 mm) maximum above the floor....
-
11B-604.6 Flush controls
Hand operated flush controls shall comply with Section 11B-309 except they shall be located 44 inches (1118 mm) maximum above the floor....
-
1009.9 Signage
Signage indicating special accessibility provisions shall be provided as shown: Each door providing access to an area of refuge from an adjacent floor area shall be identified by a...
-
Feature 1 - Parking and Passenger Drop-Off Areas
In order to be usable, the access aisle must be level, clear of gravel or mud, and the surface must be in good condition without wide cracks or broken pavement....
-
Vanity Counter Tops
The Board has removed the minimum surface requirement (2 square feet) for vanity counter tops....
-
3. Buttock-Popliteal Length
The median buttock-popliteal length provides an upper bound for the depth of a seating surface....
-
3.3 Data Sources
Early on, it became clear that some Committee members were unfamiliar with issues raised during transfers from a wheelchair or scooter onto a surface such as an examination table....
-
4.3.3 Imaging Equipment Used for Interventional and Biopsy Procedures with Sedated Patients
patients undergoing these procedures receive some form of sedation prior to transfer.CC When sedated, all patients โ regardless of their physical abilities โ are assisted onto the transfer surface...
-
Beach Access Routes
A beach access route is a continuous, unobstructed path that crosses the surface of the beach and provides pedestrians access to the water....
-
Maintenance (Trail Terminology)
trails, clearing the trail of encroaching brush or grasses, and removing rock slides Maintaining trail tread, such as filling ruts, reshaping a trail bed, repairing a trail surface...
-
205 Operable Parts
by service or maintenance personnel (Exception 1) electrical or communication receptacles serving a dedicated use (Exception 2) certain outlets at kitchen counters (Exception 3) floor...
-
2. What does the ADA require for accessibility of pools?
The Standards also provide technical specifications for when a means of entry is accessible, such as, for pool lifts, the location, size of the seat, lifting capacity, and clear floor space...
-
M305.2.4 Cross Section (Section-by-Section Analysis)
The Access Board sought input in MDE NPRM preamble question 21, on whether the gripping surfaces of current transfer supports on different types of equipment meet the cross sectional dimensions...
-
Trailhead Information Signs [F216.13 and 1017.10]
The new trail information signs must include the following information: Length of the trail or trail segment Type of trail surface Typical and minimum trail tread...
-
T402 Ramps and Bridgeplates
The technical requirements for ramps and bridgeplates in the 2016 Non-Rail Vehicle Guidelines include provisions on design load, installation and operation, emergency operation, surfaces...
-
Executive Summary
Mitigation of changes in lighting levels such as between the outdoors and the interior, from one level of interior illumination to another, and within spaces between one surface and another...