Interior stairs shall have the upper approach and lower tread marked by a stripe providing clear visual contrast....
Search Results "Clear Floor Area"
-
11B-504.4.1 Contrasting stripe
-
Passing Spaces on Trails
A 60-inch (1,525-millimeter) clear tread width is required for two wheelchairs to pass safely and comfortably on a trail....
-
Hospital and healthcare settings. (Section-by-Section Analysis)
As required by the ADA, a healthcare facility must permit a person with a disability to be accompanied by his or her service animal in all areas of the facility in which that person would...
-
201.1.1 Vertical accessibility
(4) Theaters, concert halls, and stadiums, or other large assembly areas that have stadium-style seating or tiered seating if sections 221 and 802 are met....
-
11B-217.4.3.1 Public buildings
Where at least one public pay telephone is provided in a public use area of a public building, at least one public TTY shall be provided in the public building in a public use area. ...
-
Wheelchair
This definition does not apply to Federal wilderness areas; wheelchairs in such areas are defined in section 508(c)(2) of the ADA, 42 U.S.C. 12207(c)(2)....
-
Wheelchair
This definition does not apply to Federal wilderness areas; wheelchairs in such areas are defined in section 508(c)(2) of the ADA, 42 U.S.C. 12207(c)(2)....
-
11B-217.4.3.1 Public buildings
Where at least one public pay telephone is provided in a public use area of a public building, at least one public TTY shall be provided in the public building in a public use area. ...
-
11B-217.4.3.1 Public buildings
Where at least one public pay telephone is provided in a public use area of a public building, at least one public TTY shall be provided in the public building in a public use area....
-
217.4.3.1 Public Buildings
Where at least one public pay telephone is provided in a public use area of a public building, at least one public TTY shall be provided in the public building in a public use area....
- Stanley Access Technologies Dura-Care 7200 Manual Sliding Door
-
F202.6.3.1 Multiple Facilities
At least one toilet facility or bathing facility for each sex on each floor that has toilet facilities or bathing facilities shall comply with F213.2 and F213.3....
-
H11
If mirrors are provided, is the bottom of the reflecting surface for the mirror at this lavatory no higher than 40 inches above the floor or is a full length mirror provided?...
-
3a.
Note: A ramp, lift, or elevator can be used to provide access to floor levels....
-
4.8.5(2)
(2) If handrails are not continuous, they shall extend at least 12 in (305 mm) beyond the top and bottom of the ramp segment and shall be parallel with the floor or ground surface (see Fig...
-
§100.70(c)(4)
(4) Assigning any person to a particular section of a community, neighborhood or development, or to a particular floor of a building, because of race, color, religion, sex, handicap, familial...
-
11B-708.4 Residential dwelling unit communication systems
Communications systems between a residential dwelling unit and a site, building, or floor entrance shall comply with Section 11B-708.4....
-
11B-407.4.6.2 Buttons
Car control buttons with floor designations shall comply with Section 11B-407.4.6.2. Exception: Reserved....
-
902.3 Height
The tops of dining surfaces and work surfaces shall be 28 inches (710 mm) minimum and 34 inches (865 mm) maximum above the finish floor or ground....
-
306.3.2 Maximum Depth
Knee clearance shall extend 25 inches (635 mm) maximum under an element at 9 inches (230 mm) above the finish floor or ground....
-
11B-226.2 Dispersion
Dining surfaces required to comply with Section 11B-902 shall be dispersed throughout the space or facility containing dining surfaces for each type of seating in a functional area....
-
11B-226.2 Dispersion
Dining surfaces required to comply with Section 11B-902 shall be dispersed throughout the space or facility containing dining surfaces for each type of seating in a functional area....
-
[A] BUILDING
Parking lots, play areas, patios, constructed trails, man-made outdoor areas are often not considered to be buildings. ...
-
11B-705.1.1.3.2
Contrast in percent shall be determined by: Contrast percent = [(B1-B2)/B1] x 100 percent where B1 = light reflectance value (LRV) of the lighter area and B2 = light reflectance...