NPRM Preamble Discussion: The 2010 Standards specify the following dimensions for grab bars to enable individuals with disabilities to firmly grasp the grab bars and support themselves during...
Search Results "ASCII: American Standard Code for Information Interexchange"
Filters
Commonly Searched Documents
-
5.4.6 Transfer Support Gripping Surface Cross Section and Clearances for M301, M302, and M305.2
-
4.3.4 Industry Considerations in Designing Accessible Imaging Equipment
4.3.4 Industry Considerations in Designing Accessible Imaging Equipment When considering applying accessibility standards to diagnostic imaging equipment, the MDE Advisory Committee recognized...
-
SIDEWALKS
Unless already provided, within three years of the effective date of this Agreement, the City of Waukegan will provide curb ramps or other sloped areas complying with the Standards or UFAS...
-
Allegion aptiQ Multi-Technology Single Gang Reader
Our readers use an open architecture platform designed to work with industry standards and common access control system interfaces....
-
Panda IS.14 Aluminum Wood Clad IMPACT Lift & Slide System
System Overview: Designed to comply with stringent Florida Building Codes TAS 201; TAS 202; and TAS 203; and U.S. building regulations from wind-borne debris areas outside the high velocity...
-
IPS Corporation Truebro® Lav Guard® 2 Undersink Piping Covers
Strict code compliance minimizes risk. Lav Guard 2 complies with: ADA article 4.19.4, CABO/ANSI 4.20.4, UFAS 4.19.4, Calif....
-
IDEA Center
Informally, most respondents reported that they had smaller and more maneuverable chairs for use at home....
-
502.2.1 User Control of Accessibility Features (Section-by-Section Analysis)
This provision would be new to the 508 Standards and 255 Guidelines, though it draws on the prohibition in § 1194.21(b) of the existing 508 Standards against disrupting or disabling accessibility...
-
Accessible Routes in Dwelling Units with Mobility Features
The 2010 Standards at sections 233.3.1.1, 809.1, 809.2, 809.2.1, and 809.4 will require all spaces and elements within dwelling units with mobility features to be on an accessible route....
-
5.7.1.1 Lift Compatibility Clearance in Base for Stretchers (M301)
The change harmonizes this provision with the international standards. IEC 60601-2-52 provides requirements for stretchers and includes a lift clearance at the 39 inch width....
-
Facility
Facilities must comply with all 2010 ADA Standards for Accessible Design for new construction and remodeling projects....
-
Stadium-style theaters. (Section-by-Section Analysis)
The 1991 Standards require that wheelchair seating "provide people with physical disabilities a choice of admissions prices and lines of sight comparable to those for members of the general...
-
G.12 - May an agency exempt an acquisition from the requirements of Section 508 if such procurement is undertaken to comply with the Government Paperwork Elimination Act (GPEA)?
., comply with the Access Board's standards where applicable....
-
Door Hardware
The ANSI standard also recognizes this point....
-
12101(b)(4)
L. 110-325, § 2, Sept. 25, 2008, 122 Stat. 3553, provided that: (4) to reject the standards enunciated by the Supreme Court in Toyota Motor Manufacturing, Kentucky, Inc. v....
-
407.12.3 Forward Reach (Section-by-Section Analysis)
As noted previously, the existing 508 Standards do not provide specifications for forward reaches....
-
C102.7.2 ITU-T Recommendation E.161
Advisory C102.7 International Telecommunications Union Telecommunications Standardization Sector (ITU-T). ...
-
C102.5 IETF
Copies of the referenced standard may be obtained from the Internet Engineering Task Force (http://www.ietf.org)....
-
210 Stairways
1991 Standards for Accessible Design 2010 Standards for Accessible Design What’s New/Different 4.1.3(4) Interior...
-
3.3.15.3 Side (lateral) reach – over an obstruction depth of 610 mm
For heights that approximated the U.S. standard of 1170 mm (46 in.), only 31% of the manual wheelchair users, 24% of the power wheelchair users and 13% of the scooter users could reach 610...
-
Specific Spaces and Occupancies
The ADA Standards include scoping requirements specific to certain types of spaces and facilities that apply based on the intended use and design....
-
§ 35.151(k)(2) Alterations to detention and correctional facilities.
Alterations to jails, prisons, and other detention and correctional facilities shall comply with the 2010 Standards except that public entities shall provide accessible mobility features...
-
11B-1009.2.1 Pool lift location
[2010 ADA Standards] 1009.2.1 Pool Lift Location. Pool lifts shall be located where the water level does not exceed 48 inches (1220 mm). Exceptions: 1. ...
-
11B-404.3.1 Clear width
[2010 ADA Standards] 404.3.1 Clear Width. Doorways shall provide a clear opening of 32 inches (815 mm) minimum in power-on and power-off mode....
