If seating for people in wheelchairs is provided at tables or counters, knee spaces at least 27 in (685 mm) high, 30 in (760 mm) wide, and 19 in (485 mm) deep shall be provided (see Fig....
Search Results "Parking Space Width"
-
4.32.3 Knee Clearances
-
ADAPTABILITY
The ability of certain building spaces and elements, such as kitchen counters, sinks, and grab bars, to be added or altered so as to accommodate the needs of either disabled or nondisabled...
-
M305.2.2 Length (Section-by-Section Analysis)
inches deep, the Committee recommended requiring a transfer support to extend horizontally along the side of the patient table at the designated transfer location for at least the minimum width...
-
F219.2 Required Systems
In each assembly area where audible communication is integral to the use of the space, an assistive listening system shall be provided....
-
Assistive Listening System (ALS)
An amplification system utilizing transmitters, receivers, and coupling devices to bypass the acoustical space between a sound source and a listener by means of induction loop, radio frequency...
-
219.2 Required Systems
In each assembly area where audible communication is integral to the use of the space, an assistive listening system shall be provided....
-
212.3 Sinks
Where sinks are provided, at least 5 percent, but no fewer than one, of each type provided in each accessible room or space shall comply with 606....
-
T208.2.2 Doorways on Two Sides of vehicle
Where non-rail vehicles have doorways on two sides, a passenger access route shall connect each wheelchair space to doorways on both sides of the vehicle that provide a means of accessible...
-
306.2.4 Additional Clearance
Space extending greater than 6 inches (150 mm) beyond the available knee clearance at 9 inches (230 mm) above the finish floor or ground shall not be considered toe clearance....
-
Water Closets [4.16]
Clear floor space requirements at a toilet not located in a stall are different from those for a toilet within a stall....
-
4.1.7(3)(d)
(d) Accessible routes from an accessible entrance to all publicly used spaces on at least the level of the accessible entrance shall be provided....
-
4.1.7(2)(d)
(d) Accessible routes from an accessible entrance to all publicly used spaces on at least the level of the accessible entrance shall be provided....
-
Trail
A pedestrian route provided primarily to connect elements, spaces, or facilities within a site is not a trail; it is an outdoor recreation access route (ORAR)....
-
DORMITORY
A space in a building where group sleeping accommodations are provided in one room, or in a series of closely associated rooms, for persons not members of the same family group, under joint...
-
DORMITORY
A space in a building where group sleeping accommodations are provided in one room, or in a series of closely associated rooms, for persons not members of the same family group, under joint...
-
SafetyStepTD Traditional Detectable Warning System
This flexible cement-based mat comes in 10 ft. lengths (widths are either 2' or 3' ft), which allows you to cover more sq. ft. in one application....
-
Nova Health Products LiteRamp 5' Wheelchair and Scooter Ramp (LR5)
slip off stairs Aircraft aluminum construction Fully covered with safety non-skid tape Weather resistant - can be left outdoor year-round 29-3/4" working width...
-
Nova Health Products LiteRamp 4' Wheelchair and Scooter Ramp (LR4)
slip off stairs Aircraft aluminum construction Fully covered with safety non-skid tape Weather resistant - can be left outdoor year-round 29-3/4" working width...
-
Nova Health Products LiteRamp 3' Wheelchair and Scooter Ramp (LR3)
slip off stairs Aircraft aluminum construction Fully covered with safety non-skid tape Weather resistant - can be left outdoor year-round 29-3/4" working width...
-
Nova Health Products LiteRamp 2' Wheelchair and Scooter Ramp (LR2)
slip off stairs Aircraft aluminum construction Fully covered with safety non-skid tape Weather resistant - can be left outdoor year-round 29-3/4" working width...
-
Rockwood Manufacturing Company 70REA Push Plate - .050" Thick 3" x 12" Plate
., 70REA US32D or for non-standard size 70 (width x height) and finish. Specify any additional optional features. Options: • Custom sizes available upon request....
-
Rockwood Manufacturing Company 71A Push Plate - .062" Thick 3" X 12" Plate
., 71A US32D or for non-standard size 71 (width x height) and finish. Specify any additional optional features. Options: • Custom sizes available upon request....
-
Rockwood Manufacturing Company 70A Push Plate - .050" Thick 3" x 12" Plate
Ordering: Specify plate number followed by size designation and finish (70A US32D) or for non-standard size 70 (width x height) and finish. Specify any additional optional features....
-
SDC S6000 Spectra Exit Devices
Minimum Stile Width : 4 1/2"(114 mm) Panic and fire exit hardware ANSI/BHMA A156.3-2001 Grade 1 Compliant CA Title 19 Compliant...
