Upon its completion, this report shall be provided to Plaintiffs’ counsel and the third-party Facilitator (provided for in ¶¶ 24-25), but shall otherwise remain confidential....
Search Results "Shall"
-
III. ARCHITECTURAL ACCESS
-
11B-809.8 Doors
Doors to small mechanical closets specifically dedicated to furnaces or hot water heaters shall not be required to comply with this section....
-
11B-605.2 Height and depth
Urinals shall be the stall-type or the wall-hung type with the rim 17 inches (432 mm) maximum above the finish floor or ground....
-
1132A.4 Level floor or landing
The floor or landing on each side of a door shall be level....
-
11B-217.4.3.2 Private buildings
Where four or more public pay telephones are provided in a private building, at least one public TTY shall be provided in the building....
-
11B-217.4.3.1 Public buildings
Where at least one public pay telephone is provided in a public building, at least one public TTY shall be provided in the building....
-
11B-407.4.6.2.1 Size and shape
Buttons shall have square shoulders, be ¾ inch (19.1 mm) minimum in their smallest dimension and be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding surface...
-
11B-802.1.4 Approach
Wheelchair spaces shall adjoin accessible routes. Accessible routes shall not overlap wheelchair spaces. [2010 ADAS] Advisory 802.1.4 Approach. ...
-
11B-1005.4 Clear floor or ground space
At each location where there are railings, guards, or handrails complying with Section 11B-1005.2.1, a clear floor or ground space complying with Section 11B-305 shall be provided....
-
11B-215.4 Transient lodging
Guest rooms required to comply with Section 11B-224.4 shall provide fire alarms complying with Chapter 9, Section 907.5.2.3.3, and carbon monoxide alarms, where provided, complying with...
-
F244.2.3.2.2 Vehicles Other Than Recreational Vehicles
Where parking spaces are provided for vehicles other than recreational vehicles, at least one parking space shall comply with 1012.3, 1012.4, and 1012.5....
-
11B-904.3.2 Counter
The counter surface height shall be 38 inches (965 mm) maximum above the finish floor or ground....
-
F203.3 Construction Sites
sites directly associated with the actual processes of construction, including but not limited to, scaffolding, bridging, materials hoists, materials storage, and construction trailers shall...
-
11B-224.2 Guest rooms with mobility features
In transient lodging facilities, guest rooms with mobility features complying with Section 11B-806.2 shall be provided in accordance with Table 11B-224.2, as follows....
-
11B-220.1.3 Three or more automatic teller machines or fare machines
Where three or more automatic teller machines or fare machines are provided at a location, at least 50 percent shall comply with Sections 11B-707.2 through 11B-707.8 and the rest shall comply...
-
302.3 Openings
Openings in floor or ground surfaces shall not allow passage of a sphere more than ½ inch (13 mm) diameter except as allowed in 407.4.3, 409.4.3, 410.4, 810.5.3 and 810.10....
-
1011.1 General
All outdoor constructed features shall comply with 1011.2 and 1011.3. ...
-
F208.1 General
Where parking spaces are provided, parking spaces shall be provided in accordance with F208....
-
T603.2 Orientation
Wheelchair securement systems shall secure the wheelchair so that the occupant faces the front of the non-rail vehicle....
-
T213.3 Armrests at Aisle Seats on Over-the-Road Buses
Where armrests are provided on the aisle side of seats on over-the-road buses, folding or removable armrests shall be provided on the aisle side of at least 50 percent of aisle seats....
-
T402.7 Edge Guards
Ramps and bridgeplates shall provide edge guards continuously along each side of the ramp or bridgeplate to within 3 inches (75 mm) of the end of the ramp or bridgeplate that is deployed...
-
IV. GENERAL INJUNCTIVE RELIEF
Defendants shall not discriminate against individuals on the basis of disability in the full and equal enjoyment of the goods, services, facilities, privileges, advantages, or accommodations...
-
§ 35.151(b)(3)
(3) Alterations to historic properties shall comply, to the maximum extent feasible, with the provisions applicable to historic properties in the design standards specified in § 35.151(c...
-
11B-407.4.6 Elevator car controls
Where provided, elevator car controls shall comply with Sections 11B-407.4.6 and 11B-309.4 _|Operation|_....