which exceed 10,000 square feet (929 m2) on any floor, an accessible means of vertical access via ramp, elevator or lift shall be provided within 200 feet (60,960 mm) of travel of each stair...
Search Results "Stair Riser"
Commonly Searched Documents
-
11B-206.2.3.2 Distance to Elevators
-
11B-206.2.3.2 Distance to Elevators
which exceed 10,000 square feet (929 m2) on any floor, an accessible means of vertical access via ramp, elevator or lift shall be provided within 200 feet (60,960 mm) of travel of each stair...
- Kompan, Inc. Elements Play Structures Tower ELE400050
-
R409.3 Continuity
Handrails shall be continuous within the full length of each ramp run or stair flight....
-
Surface discontinuities
Elevation changes due to ramps or stairs do not, themselves, constitute surface discontinuities....
-
Vertical Dispersion: ADA Standard Section 221.2.3.2
Section 221.2.3.2 covers scoping requirements in the current ADA Standards for vertical dispersion in assembly areas.
-
F221.2.2 Integration
For example, it would be unacceptable to place only the wheelchair spaces, or only the wheelchair spaces and their associated companion seats, outside the seating areas defined by risers...
-
Temporary Solutions for Election Day - Hallways and Corridors - Voters Who are Blind or Who Have Low Vision
Problem Three: The bottom of a stair is open and voters who are blind or who have low vision can hit their heads on the underside of the stair....
-
Integration: ADA Standard Section 221.2.2
Section 221.2.2 covers scoping requirements in the current ADA Standards for integration of wheelchair spaces in assembly areas.
-
11B-221.2.2 Integration
For example, it would be unacceptable to place only the wheelchair spaces, or only the wheelchair spaces and their associated companion seats, outside the seating areas defined by risers...
-
11B-221.2.2 Integration
For example, it would be unacceptable to place only the wheelchair spaces, or only the wheelchair spaces and their associated companion seats, outside the seating areas defined by risers...
-
11B-221.2.2 Integration
For example, it would be unacceptable to place only the wheelchair spaces, or only the wheelchair spaces and their associated companion seats, outside the seating areas defined by risers...
-
Handrails
Handrails are required along both sides of ramps and stairs....
-
Handrails
...are there handrails on both sides of the stair at a uniform height of 34"-38" above the front edge of the step?...
-
Do facilities in remote locations have to be accessible?
These toilets are simply risers placed over a pit, with no walls. The Superior National Forest has developed an accessible riser for these remote settings....
-
Accessible Route
Stairs are not considered part of an accessible route but where they are required to comply with 4.9, it is recommended that routes to them meet the requirements for accessible routes since...
-
R409.4 Height
Top of gripping surfaces of handrails shall be 865 mm (2.8 ft) minimum and 965 mm (3.2 ft) maximum vertically above walking surfaces, ramp surfaces, and stair nosings....
-
4.1.6(1)(d)
For example, if the elevators and stairs in a building are being altered and the elevators are, in turn, being made accessible, then no accessibility modifications are required to the stairs...
-
Swimming Pools, Wading Pools & Spas
Word Fillable Form (2.8MB) Word Non-Fillable Form (2.6MB) PDF Non-Fillable Form (1.0MB)
-
221.9 Stadium Style Movie Theaters
Wheelchair spaces and companion seats shall be located on a riser or cross-aisle in the stadium section that satisfies at least one of the following criteria: (i) It is located within the...
-
Pit Toilets [F213.1, Exception]
Pit toilets are primitive outhouses that may consist simply of a hole in the ground covered by a toilet riser (figure 26)....
- Ascension Virtuoso Portable Wheelchair Lift Demonstration Video
-
11B-106.5 Defined terms
PLATE KITCHEN OR KITCHENETTE LAVATORY MAIL BOXES MARKED CROSSING MAY MEZZANINE MULTIBEDROOM HOUSING UNIT NFPA NOSING OCCUPANT LOAD OCCUPIABLE SPACE OPEN RISER...
-
10.3.1(16)
At the top and bottom of each escalator run, at least two contiguous treads shall be level beyond the comb plate before the risers begin to form....