Where separate grab bars are required on adjacent walls at a common mounting height, an L-shaped or U-shaped grab bar meeting the dimensional requirements of Section 11B-607.4.1 or 11B-607.4.2...
Search Results "Separation"
-
11B-607.4 Grab bars
-
11B-607.4 Grab bars
Where separate grab bars are required on adjacent walls at a common mounting height, an L-shaped or U-shaped grab bar meeting the dimensional requirements of Section 11B-607.4.1 or 11B-607.4.2...
-
11B-220.1 Automatic teller machines and fare machines
If a bank provides both interior and exterior ATMs, each such installation is considered a separate location....
-
Incorporation of Guidelines for Play Areas and Recreation Facilities
In separate rulemakings, the Board developed supplements to ADAAG covering play areas and recreation facilities....
- BEA Inc. Piezo Push Button Heavy Duty Door Actuator (Push to Exit)
- Bobrick TrimLineSeries™ Surface-Mounted Napkin/Tampon Vendor 25₵, 50₵ and Free Operation B-370639
- Bobrick ConturaSeries® Semi-Recessed Napkin/Tampon Vendor 25₵, 50₵ and Free Operation B-47064
- Bobrick ClassicSeries® Surface-Mounted Napkin/Tampon Vendor 25₵, 50₵ and Free Operation B-2706
- D&D Technologies SureClose 57 Hydraulic Closer and Hinge
-
501.1 Scope (Section-by-Section Analysis)
The value of promoting a single harmonized standard outweighs any small benefit that might be achieved by conforming to overlapping, but separate, standards....
-
Homeless Shelters, Group Homes, and Similar Social Service Establishments
Where separate shower facilities are provided for men and for women, at least one roll-in shower must be provided for each gender....
-
Scoping Requirements for Elevators
LULA elevators (408) and private residence elevators (409) are addressed in separate sections since their specifications vary considerably from the other elevator types....
-
§ 382.55 Miscellaneous provisions
disability in terminals or require them to remain in a holding area or other location in order to be provided transportation, to receive assistance, or for other purposes, or otherwise mandate separate...
-
307 Protruding Objects
The Board intends to develop guidelines specific to public rights-of-way in a separate rule making....
-
Obstacles [1016.5]
Where possible, separate obstacles that cross the full width of an ORAR by at least 48 inches so people using mobility devices can fully cross one obstacle before confronting another....
-
Section 36.406(b) Application of Standards to Fixed Elements (Section-by-Section Analysis)
The Department is also clarifying that the advisory notes, appendix notes, and figures that accompany the 1991 Standards do not establish separately enforceable requirements. ...
-
Data Analysis
For example, the area measurement depends on two variables that cannot be analyzed separately: the amount of space occupied by the physical dimensions of the WMD user and the actual location...
-
711.3.2 Membrane penetrations
Outlet boxes on opposite sides of the wall shall be separated as follows: 1.1. By a horizontal distance of not less than 24 inches (610 mm); 1.2....
-
1. Accessible route(s)
On-grade walks or paths between separate buildings with covered multifamily dwellings, while not required, should be accessible unless the slope of finish grade exceeds 8.33% at any point...
-
Typical Issues
Where a curb separates the vehicle space from the access aisle or the access aisle from an accessible route, a curb ramp must be provided so people with disabilities can get to the accessible...
-
1193.33(b) (Advisory Guidance)
Supplying a telephone number, and preferably a separate TTY number, is the most universal method....
-
208.2 Minimum Number
The number of parking spaces required to be accessible is to be calculated separately for each parking facility; the required number is not to be based on the total number of parking spaces...
-
Character Specifications
Where tactile and visual characters are provided on separate signs, the proposed rule specified that the stroke thickness of tactile characters be no greater than 15% of the character height...
-
Doors in a Series
Section 404.2.6 specifies the minimum separation between doors and gates in series (48 inches plus the width of doors or gates swinging into the space)....