Hand washing fixtures shall comply with Section 11B-606.
Search Results "Locker Room"
Filters
Commonly Searched Documents
-
11B-805.2.1 Hand washing fixtures
-
11B-805.2.1 Hand washing fixtures
Hand washing fixtures shall comply with Section 11B-606.
-
11B-803.6 Mirrors
Mirrors shall be installed with the bottom edge of the reflecting surface 20 inches (508 mm) maximum above the finish floor or ground. Mirrors shall be full length with a reflective...
-
11B-803.6 Mirrors
Mirrors shall be installed with the bottom edge of the reflecting surface 20 inches (508 mm) maximum above the finish floor or ground. Mirrors shall be full length with a reflective...
-
11B-805.2.1 Hand washing fixtures
Hand washing fixtures shall comply with Section 11B-606.
-
11B-805.3.1 Wheelchair spaces
Where seating is provided in waiting rooms, at least 5 percent of the seating shall be wheelchair spaces complying with Section 11B-802.1....
-
Door Maneuvering Clearance
The proposed rule exempted doors to hospital patient rooms that are at least 44 inches wide from the specifications for latch side clearances....
-
11B-223.2.1 Facilities not specializing in treating conditions that affect mobility
conditions that affect mobility, including hospitals, psychiatric and detoxification facilities, at least 10 percent, but no fewer than one, of the patient bedrooms or resident sleeping rooms...
-
11B-223.2.1 Facilities not specializing in treating conditions that affect mobility
conditions that affect mobility, including hospitals, psychiatric and detoxification facilities, at least 10 percent, but no fewer than one, of the patient bedrooms or resident sleeping rooms...
-
11B-223.2.1 Facilities not specializing in treating conditions that affect mobility
conditions that affect mobility, including hospitals, psychiatric and detoxification facilities, at least 10 percent, but no fewer than one, of the patient bedrooms or resident sleeping rooms...
-
803 Dressing, Fitting, and Locker Rooms
Requirements for dressing rooms, fitting rooms, and locker rooms are contained in section 803. Comment. Section 803.2 requires wheelchair turning space in accessible rooms....
-
4.22.3 CLEAR FLOOR SPACE
An unobstructed turning space complying with 4.2.3 shall be provided within an accessible toilet room....
-
Pre-Event Attendee Registration and Communications
Knowing your audience is critical to ensuring that meeting room layouts, menus, and other elements of the event will allow every participant to engage fully....
-
4.23.1 Minimum Number
Bathrooms, bathing facilities, or shower rooms required to be accessible by 4.1 shall comply with 4.23 and shall be on an accessible route....
-
11B-224.1.2 Guest room doors and doorways
[2010 ADA Standards] 224.1.2 Guest Room Doors and Doorways....
-
11B-213.3 Plumbing fixtures and accessories
Plumbing fixtures and accessories provided in a toilet room or bathing room required to comply with Section 11B-213.2 shall comply with Section 11B-213.3....
-
11B-224.1.2 Guest room doors and doorways
[2010 ADAS] 224.1.2 Guest Room Doors and Doorways. ...
-
11B-224.1.2 Guest room doors and doorways
[2010 ADAS] 224.1.2 Guest Room Doors and Doorways. ...
-
11B-809.10.8.2 Floor space
A floor space 30 inches (762 mm) minimum by 48 inches (1219 mm) minimum shall be provided centered on the lavatory.
-
15. Laundry rooms
Laundry rooms 4.32.6 If provided in the facility or at the site, at least one of each type of appliance provided in each laundry area, except that laudry rooms serving covered multifamily...
-
4.23.1 MINIMUM NUMBER
Bathrooms, bathing facilities, or shower rooms required to be accessible by 4.1 shall comply with 4.23 and shall be on an accessible route....
-
Feature 1 - Parking and Passenger Drop-Off Areas
The accessible parking space has an adjacent and parallel access aisle that provides needed room for a person to open the car door fully and then to stand with the aid of a walker or crutches...
-
11B-805.4.2 Equipment
Clear space complying with Section 11B-305.2 shall be provided as required for specific equipment.
-
11B-805.4.2 Equipment
Clear space complying with Section 11B-305.2 shall be provided as required for specific equipment.