The clear floor space adjacent to the control shall be located beyond the arc of the door swing. Advisory 11B-404.3.5 Controls. ...
Search Results "Door Hardware"
Filters
Commonly Searched Documents
-
11B-404.3.5 Controls
-
4.13.5 Clear Width
Doorways shall have a minimum clear opening of 32 in (815 mm) with the door open 90 degrees, measured between the face of the door and the opposite stop (see Fig. 24(a), (b), (c), and (d...
-
Architectural Builders Hardware Mfg., Inc. 6830 Series Time Out/Reverse Low Profile Hospital Latch
6830 Series Template - Low Profile, Reverse Latch, Cylindrical Push Pull Reverse Latch Cylindrical push/pull reverse latch 1-3/4" standard door thickness (specify if different...
-
4.13.5 CLEAR WIDTH
Doorways shall have a minimum clear opening of 32 in (815 mm) with the door open 90 degrees, measured between the face of the door and the stop (see Fig. 24(a), (b), (c), and (d))....
-
TownSteel ED1400F Grade 1 Mortise Fire Device
ED1400F is ANSI Certified Grade 1 and UL listed for Fire Hardware. Retrofit 98/99 installation requires no additional door prep. ...
-
Sargent 7800 Mortise Lock with Push/Pull Trim Hardware
Stile Requirement - Minimum of 5 inches (125mm) Door Thickness 1 3/4 inches (44mm) to 2 inches (57mm) standard with adaptable spindle. Easy installation....
-
404.3.5 Controls
The clear floor space adjacent to the control shall be located beyond the arc of the door swing....
-
404.3.5 Controls
The clear floor space adjacent to the control shall be located beyond the arc of the door swing....
-
TownSteel ED5500F Grade 1 Fire Rim Device
ED5500F is ANSI/BHMA A156.3-2008 Grade 1 certified and UL listed for fire exit hardware....
-
11B-803.3 Door swing
Doors shall not swing into the room unless a turning space complying with Section 11B-304.3 is provided beyond the arc of the door swing....
-
Hager Companies 3800 Series Sliding Door Mortise Lock
Hager 3800 Series mortise lock provides maximum security and durability for the harshest environments. With field reversible handing, ease of installation, and both escutcheon and...
-
Allegion Von Duprin 88 Series Cross Bar Exit Device
Exit devices are a critical part of a door opening or access system and will provide safe and reliable service when properly applied and maintained....
-
404.3.5 Controls
The clear floor space adjacent to the control shall be located beyond the arc of the door swing....
-
TownSteel ED5500 Grade 1 Panic Rim Device
ED5500 is ANSI/BHMA A156.3-2008 Grade 1 certified and UL listed for panic exit hardware....
-
11B-411.3.1 Type
Elevator door type shall comply with Section 11B-407.3.1....
-
CRL-Blumcraft® Panic Handles 08 7100
08 7100 CRL-Blumcraft® Panic Handles For 1/2" or 3/4" (12 or 19 mm) Tempered Glass Doors UL, ULC, and ANSI/BHMA Certified Available in New Designer Series For a Unique, Modern...
-
404.2.10 Door and Gate Surfaces
Swinging door and gate surfaces within 10 inches (255 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
11B-408.3 Elevator doors
Elevator hoistway doors shall comply with Section 11B-408.3....
-
11B-408.3 Elevator doors
Elevator hoistway doors shall comply with Section 11B-408.3....
-
11B-408.3 Elevator doors
Elevator hoistway doors shall comply with Section 11B-408.3....
-
Jacknob Corp. 6251 3" High ADA Door Pull Brass-Chrome
6251 Door Pull 3" High (ADA) Brass/Chrome Polished Chrome Brass...
-
d. i.
Provide doors that require no more than 5 lbf to push or pull open at the following locations: (1) Spy City Café men's and women's toilet rooms; (2) Main Lobby restrooms vestibule;...
-
Corbin Russwin Inc. ED5000 Series Exit Device
Aesthetics Over the past 100 years, Corbin Russwin has been well-known for weaving pleasing aesthetics and inventive designs into architectural door hardware, and today’s wide stile exit...
-
404.2.10 Door and Gate Surfaces
404.2.10 Door and Gate Surfaces....
