5.1.3 Transfer Surface Low Height. No agreement on final low height...
Search Results "Character Height (Visual)"
Commonly Searched Documents
-
5.1.3 Transfer Surface Low Height
- Pressalit Care 3000 Adult Changing Table
-
216.4.3 Directional Signs
216.4.3 Directional Signs. Signs required by section 1003.2.13.6 of the International Building Code (2000 edition) or section 1007.7 of the International Building Code (2003 edition)...
-
F216.4.3 Directional Signs
Signs required by section 1003.2.13.6 of the International Building Code (2000 edition) or section 1007.7 of the International Building Code (2003 edition) (incorporated by...
-
Adjustable Height Range Considered
See Analysis of Seat Heights for Wheeled Mobility Devices at: http://udeworld.com/analysis-of-seat-height-for-wheeled mobility-devices....
-
5.1.1 Transfer Surface Height Adjustability
5.1.1 Transfer Surface Height Adjustability. The transfer surface should have an adjustable height in small virtually continuous increments....
-
11B-411.1.2 Car designations
Elevator cars shall be designated with a single alphabetic character....
-
11B-411.1.2 Car designations
Elevator cars shall be designated with a single alphabetic character....
-
M302.2.2 Sunset
The low transfer position height, Item A of M302.2.1, shall cease to have effect on [Insert date 5 years after date of publication in the Federal Register]. [sic]...
-
Paragraph (c) (Advisory Guidance)
Depending upon the product, the manufacturer may also be able to allow users to adjust colors to match their preferences and visual abilities. d. Avoid colors with a low luminance....
-
M302.2.1 Adjustability (Section-by-Section Analysis)
The MDE NPRM proposed a transfer surface height range for diagnostic equipment used by patients in a seated position of 17 inches minimum and 19 inches maximum....
-
1010.1.9.7 Delayed egress locks
pass through not more than two delayed egress locking systems provided the combined delay does not exceed 30 seconds. 5.1 A tactile sign shall also be provided in Braille and raised characters...
-
11B-703.4.1 Height above finish floor or ground
mm) maximum above the finish floor or ground surface, measured from the baseline of the highest line of raised characters...
-
M301.2.1 Height
The height of the transfer surface during patient transfer shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum measured from the floor to the top of the transfer surface....
-
Changes in Level and Horizontal Gaps
This height allows for freight passage while reducing the height of the first step of a rail car above the platform....
-
4.10.12(2)
(2) Tactile and Visual Control Indicators....
-
MITA Advisory Committee Members
MITA Advisory Committee Members MINORITY REPORT ON TRANSFER SURFACE HEIGHT RECOMMENDATIONS OF THE U.S. ACCESS BOARD ADVISORY COMMITTEE RE: NPRM: M301.2.1 AND M302.2.1 HEIGHT...
- PC 2000 Hi Lo Adult Changing Table
-
5.1 Transfer Surface Height
5.1 Transfer Surface Height...
-
5.1 Transfer Surface Height Recommendations
5.1 Transfer Surface Height Recommendations Description: The transfer height is set above the finished floor surface to permit transfers form mobility devices onto the transfer surface...
- Alertus Alert BeaconsĀ®
-
Employee Work Areas: ADA Standard Section 215.3
Section 215.3 covers scoping requirements in the current ADA Standards for fire alarm systems in employee work areas.
-
General: ADA Standard Section 215.1
Section 215.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for fire alarm systems.
-
11B-809.5.4 Prohibited use
Visible alarm appliances used to indicate residential dwelling unit smoke detection, carbon monoxide detection, or building fire alarm activation shall not be used for any other...