voltage headroom avoids high frequency clipping Metal loss corrector corrects frequency dependent loss from metal structures Very compact: 215 x 220 x 44 mm Microphone (XLR) and line...
Search Results "Line Spacing (Raised)"
-
Ampetronic ILD300 Professional Rack Mountable Audio Induction Loop Driver Hearing System
-
11B-230.1 General
This requirement applies to facilities such as office buildings, courthouses, and other facilities where admittance to the building or restricted spaces is dependent on two-way communication...
-
Sections 4.2 Through 4.35 (Section-By-Section Analysis and Response to Comments)
- Sections 4.2 Through 4.35 (Section-By-Section Analysis and Response to Comments) Sections 4.2 through 4.35 contain the technical specifications for elements and spaces required to be...
-
Currently, the DCFC time limit is 30 minutes maximum. New larger battery capacity will take longer to get 80% charge – i.e. Chevy Bolt EV, Tesla Model 3, 2018 Nissan LEAF, etc. Can we reconsider the time limit?
Where DCFC or any other type of charging is intended for use longer than 30 minutes, EVCS may be provided in regular parking-style vehicle spaces....
-
4.34.3(2)(a) Reach Depth Not More Than 10 in
Where the reach depth to the operable parts of all controls as measured from the vertical plane perpendicular to the edge of the unobstructed clear floor space at the farthest protrusion...
-
Technically Infeasible
altering a load-bearing member that is an essential part of the structural frame; or because other existing physical or site constraints prohibit modification or addition of elements, spaces...
-
Trailheads
Requirements for trailhead features, such as parking spaces, toilets, water spouts, and campsites, are explained in "Applying the Forest Service Outdoor Recreation Accessibility Guidelines...
-
Grab Bar Cross Sections
For consistency with specifications for handrails, the Board has revised requirements for size (609.2) and spacing (609.3)....
-
Protruding Objects [1017.9]
Objects that protrude into the trail clear tread width, passing spaces, and resting intervals can pose hazards to people who are blind or have low vision....
-
Haws AXION® MSR Barrier-Free Recessed Eye/Face Wash 7655WCC
Easy access exterior mounted in-line strainer 18 Gauge Type 304 Stainless Steel recessed cabinet is a deep-drawn heavy duty structure with smudge resistant bead blast finish The eye/...
-
Otis Elevator HANDSOFF Phone
built-in auto dialer can be programmed to dial out to any number, including emergency and local rescue operators APPLICATIONS: Can be installed in any elevator and will require a phone line...
-
Just Manufacturing Enviro Series Sensor Single Hole Non-Mixing Deck Mount Gooseneck Faucet
In-line filter with clean-out trap. Slow closing, piston operated solenoid....
-
ASI Storage Solutions Traditional Plus Locker
With the same standard features as the Traditional line, the Traditional Plus Collection is intended for more rugged applications....
-
BEA Inc. Mount Boxes Bollards
Constructed with durable carbon steel and will mount BEA’s 4 ¾” square and 4 ½” round push plate lines Can be mounted on either existing concrete or newly poured concrete...
-
Appendix Three: Bibliography
Space Requirements for Wheeled Mobility Devices in Public Transportation: Analysis of Clear Floor Space Requirements....
-
Section 2. Common use areas
"Common use areas" means rooms, spaces or elements inside or outside of a building that are made available for the use of residents of a building or the guests thereof....
-
306.3.3 Minimum Required Depth
Where knee clearance is required under an element as part of a clear floor space, the knee clearance shall be 11 inches (280 mm) deep minimum at 9 inches (230 mm) above the finish floor...
-
306.3.3 Minimum Required Depth
Where knee clearance is required under an element as part of a clear floor space, the knee clearance shall be 11 inches (280 mm) deep minimum at 9 inches (230 mm) above the finish floor...
-
Sections 4.2 Through 4.35 (Preamble, Section-by-Section Analysis)
• Sections 4.2 Through 4.35 Sections 4.2 through 4.35 contain the technical specifications for elements and spaces required to be accessible by the scoping provisions (sections 4.1 through...
-
1003.3 Clearances
Although the minimum width of the clear pier space is 60 inches (1525 mm), it is recommended that piers be wider than 60 inches (1525 mm) to improve the safety for persons with disabilities...
-
11B-208.2.3.3 Parking for guests, employees, and other non-residents
Where parking spaces are provided for persons other than residents, parking shall be provided in accordance with Table 11B-208.2....
-
11B-233.3.1.2.4 Multi-story residential dwelling units in buildings with one or more elevators
Rooms or spaces located on the primary entry level shall be served by an accessible route and comply with Sections 11B-809.6 through 11B-809.12....
-
F212.3 Sinks
Where sinks are provided, at least 5 percent, but no fewer than one, of each type provided in each accessible room or space shall comply with 606. EXCEPTIONS: 1....
-
Lawn Seating
Since such areas typically do not provide fixed seating, this provision does not require wheelchair spaces, companion seats, or designated aisle seats....