Is at least one stall at least 60 inches wide and 56 inches deep (wall mounted toilet) or 59 inches deep (floor mounted toilet)?...
Search Results "Floor Surface"
-
C. Accessibility Within Toilet Rooms
-
610.3 Shower Compartment Seats
The top of the seat shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the bathroom finish floor. Seats shall comply with 610.3.1 or 610.3.2. ...
-
407.12.2.1 Unobstructed Side Reach (Section-by-Section Analysis)
proposes that, where the operable part is located 10 inches or less behind the vertical reference plane, the operable part must be 48 inches high maximum and 15 inches high minimum above the floor...
-
What access do I need?
◼ I need an exam table that lowers to 17–19 inches from the floor. ◼ I need help getting on and off the exam table. ◼ I need to bring my service dog....
-
Tactile and Visual Signs [ADA Standards §216.2, §216.4.1]
This requirement applies to signs identifying stairways, floor levels, and areas of refuge. Examples of Signs Required to Meet Tactile and Visual Criteria...
-
Signage
Mounting height shall be 60 in (1525 mm) above the finish floor to the centerline of the sign....
-
Rakks® EHV Vanity Supports
Rakks aluminum Vanity brackets simplify and reduce the cost of installing sinks and provide a stable and sturdy mounting surface for custom-built enclosures....
-
HEWI Range 260 Door Hardware
The hardware Range 260 is made of high-quality stainless steel and will be available in 2015 with a mirror-polished surface. High-gloss PVD surfaces will also be available on request....
-
Landscape Forms Inc. Arcata Collection Benches
Seat and back surfaces are available in a variety of woods, aluminum or PolySite™ recycled plastic timbers. Bench may be surface mounted or embedded....
-
Gamco Maximum Security Front-Mounted Framed Mirror - MSA-11
Description Frame fabricated of 18-8 type 304 14-gauge (1.9mm) stainless steel with exposed surfaces having a #4 satin-finish. All welded construction....
-
Accessible Route Into and Through the Business
clearance alongside the entrance door is blocked by a sale book rack, or if a route contains scattered trip hazards from impulse items displayed on cloth-covered tables or in baskets on the floor...
-
Accessible Routes Throughout the Museum
travel between stanchions or between a wall and a stanchion, passage must be maintained at a minimum of 36 inches wide, measured from inside edge to inside edge of the stanchion bases or floor...
-
XI. Overview of Americans with Disabilities Act Accessibility Guidelines for New Construction and Alterations
Each floor in a building without a supervised sprinkler system must contain an "area of rescue assistance" (i.e., an area with direct access to an exit stairway where people unable to use...
-
C. Toilet Rooms:
PSE shall provide and maintain directional signage at inaccessible toilet rooms indicating the location of the nearest accessible toilet room on the Floor Level. ...
-
Bradley Adjustable Tilt Mirror 782
Model 782 Series Satin finish Stainless Steel Frame Adjustable Tilt Mounting Welded Corners Alternate reflective surfaces available...
-
American Specialties Omara Collection Spare Toilet Paper Roll Holder 7316
All exposed surfaces have a satin finish....
-
AJW Architectural Products U2304 Unidoor C-fold/Multifold Towel Dispenser - Recessed
Uni-Door: Fabricated of #18 ga stainless steel with a #4 satin finish & 1/2" returns to wall surface....
-
AJW Architectural Products U2314 Unidoor C-fold/Multifold Towel Dispenser - Recessed
Uni-Door: Fabricated of #18 ga stainless steel with a #4 satin finish with 1/2" returns to wall surface....
-
704.9 Vertical separation of openings
The unexposed surface temperature limitations specified in ASTM E 119 shall not apply to the flame barriers or vertical separation unless otherwise required by the provisions of this code...
-
F216.13 Trailhead Signs
The technical requirements in 1017.11 require the signs to include information on the length of the trail or trail segment; surface type; typical and minimum tread width; typical and minimum...
-
1016.1 General
The technical requirements address the surface of outdoor recreation access routes, passing spaces, and resting intervals (1016.2); the clear width of outdoor recreation access routes (1016.3...
-
Suggested best practices for architects and other design professionals
architects and other design professionals As the construction industry works to develop standards for construction tolerances related to specific materials and applications for accessible surfaces...
-
2. Electronic (Digital) Level
Note: Some architects use a "rise over run" formula to calculate the slope of a surface....
-
11B-1003.3.2 Boarding pier clearances
At high water, the entire chain is floating and a transition plate connects the first float to the surface of the launch ramp....
