confusion for not coming to a low height number was the fact that a high number was never clearly factored into the discussions, nor was the distance of movement of 8” The proposed standards...
Search Results "ASCII: American Standard Code for Information Interexchange"
Commonly Searched Documents
-
National Network of ADA Centers
-
The Roles of the Access Board and the Department of Justice
The ADA requires the Department to issue regulations that include enforceable accessibility standards applicable to facilities subject to title II or title III that are consistent with the...
-
1 - Design and drawing
1 - Design and drawing Current practice It is typical practice for architects to use the values published in guidelines and standards and repeat the values on the drawings....
-
Section 1193.2 Scoping (Section-by-Section Analysis)
Several manufacturers drew analogies to portions of facilities covered by the Americans with Disabilities Act (ADA), such as stadium seats, hotel rooms, and telephones in a bank as giving...
-
Section 36.311 Mobility Devices (Section-by-Section Analysis)
If a facility complies with the applicable design requirements in the 1991 Standards or the 2010 Standards, the public accommodation will not be required to exceed those standards to accommodate...
-
Van Accessible Parking Spaces
The 1991 Standards, at sections 4.1.2 (5)(b), 4.6.3, 4.6.4, and 4.6.5, require one in every eight accessible parking spaces to be van accessible....
-
Section 35.151(d) Scope of coverage
Although the Department may use the requirements of the 2010 Standards as a guide to determining when and how to make equipment and furnishings accessible, those determinations fall within...
-
9. I already purchased a portable lift before March 15, 2012. Can I still use it?
If you have purchased a non-fixed lift before March 15th that otherwise complies with the requirements in the 2010 Standards for pool lifts (such as seat size, etc.), you may use it, as...
-
Structural Impracticability—28 CFR 35.151
Under § 35.151(a)(2) full compliance with the requirements of the 2010 Standards is not required in new construction where a public entity can demonstrate that it is structurally impracticable...
-
Section 35.137 Mobility devices. (Section-by-Section Analysis)
If a facility complies with the applicable design requirements in the 1991 Standards or the 2010 Standards, the public entity will not be required to exceed those standards to accommodate...
-
Section 35.151(d) Scope of coverage (Section-by-Section Analysis)
Although the Department may use the requirements of the 2010 Standards as a guide to determining when and how to make equipment and furnishings accessible, those determinations fall within...
-
11B-224.1 General
[2010 ADA Standards] 224.1 General. Transient lodging facilities shall provide guest rooms in accordance with 224. Advisory 11B-224.1 General....
-
11B-703.3.1 Dimensions and capitalization
ETA Editor's Note Table 11B-703.3.1 in CBC is the same as Table 703.3.1 in 2010 ADA Standards, except for distance between dots in the same cell or adjacent cells. 2010 ADA Standards...
-
D. Effective date
Under the 1991 regulations, new construction under title II and alterations under either title II or title III had to comply with the design standards of the Department´s new regulations...
-
ATMs. (Section-by-Section Analysis)
The 1991 Standards use a performance test, requiring that "[i]nstructions and all information for use shall be made accessible to and independently usable by persons with vision impairments...
-
4. Organization of Technical Criteria
Therefore, the technical criteria in the proposed standards are organized functionally by the patient positions that the equipment is designed to support instead of by types of equipment...
-
Transfer Surface Size: Equipment Used by Patients in Supine, Prone, or Side-Lying Position (M301.2.2)
ANSI/AAMI HE75 notes that a standard examination table is 27 inches wide and a bariatric table is approximately 30 to 32 inches wide and recommends wider surfaces to make repositioning easier...
-
Sections 4.8.5 and 4.9.4
• Sections 4.8.5 and 4.9.4 of the 1991 Standards require handrail gripping surfaces to be continuous, and to be uninterrupted by newel posts, other construction elements, or obstructions...
-
R105 Definitions (Section-by-Section Analysis)
Collegiate dictionaries are used to determine the meaning of terms that are not defined in the proposed guidelines, referenced MUTCD standards, or regulations issued by federal agencies...
-
Q5: Should a school district revise its policies and procedures regarding the determination of coverage and provision of services under Section 504 and Title II?
A: Yes, if those policies and procedures do not implement the Amendments Act's new legal standards....
-
Are self-evaluations and transition plans required to be updated?
Although there is no requirement to update them, updating is the best means to ensure compliance with current regulations and design standards. A lot has changed in 27 years....
-
The National Highway Traffic Safety Administration’s (NHTSA) motor vehicle safety regulations require that a wheelchair lift be tested to withstand a 600-pound load. If the manufacturer states that the design load is 800 pounds, can the transportation operator limit actual use to 600 pounds for safety reasons?
The NHTSA safety standards and the DOT ADA regulations were designed to complement each other....
-
E102.5 Internet Engineering Task Force (IETF)
Copies of the referenced standard may be obtained from the Internet Engineering Task Force (http://www.ietf.org/)....
-
Mirrors [4.19.6]
The mounting height of the bottom of mirrors at accessible lavatories (40 inches maximum above the floor) is based on the standard eye level range of adults seated in wheelchairs (43 to...