The type of latch and lock required for all doors shall be in accordance with Section 1132A.8 and Chapter 10, Section 1008....
Search Results "Supplemental Requirement"
-
1132A.7 Type of lock or latch
-
1132A.3, Item 6
The width of any component in the means of egress system shall not be less than the minimum width required by Section 1005....
-
1009.2 Continuity and components
Each required accessible means of egress shall be continuous to a public way and shall consist of one or more of the following components:...
-
11B-208.3.3.1
11B-208.3.3.1 Detached private garages accessory to residential dwelling units, shall be accessible as required by Section 11B-208.3. ...
-
§ 37.37(g)
(g) High-speed rail systems operated by public entities are subject to the requirements of this part governing intercity rail systems....
-
§ 37.139(j)(3)
(3) The annual plan must describe specifically the means used to comply with the public participation requirements, as described in §37.137 of this part....
-
§ 37.185(c)(3)
(3) The compliance with all requirements of this part by the operator over the period between October 28, 1998 and the request for time extension....
-
§ 37.193(a)(1)(iii)
(iii) If the trip on which the person with a disability wishes to travel is already provided by an accessible bus, the operator has met this requirement....
-
§ 37.167(j)(3)
(3) The entity is not required to enforce the request that other passengers move from priority seating areas or wheelchair securement locations....
-
§ 37.165(e)
The entity may not require the individual to transfer....
-
§ 37.5(c)
(c) An entity shall not require an individual with a disability to use designated priority seats, if the individual does not choose to use these seats....
-
§ 37.215(a)
(a) Beginning October 28, 2005, the Department will review the requirements of §37.189 and their implementation. The Department will complete this review by October 30, 2006....
-
11B-813.2.1.5 Obstructions
When deployed, changing tables shall not obstruct the required width of an accessible route except as allowed by Section 11B-307.2....
-
1132A.7 Type of lock or latch
The type of latch and lock required for all doors shall be in accordance with Section 1132A.8 and Chapter 10, Section 1008....
-
11B-1008.4.5 Transfer supports
Where play components require transfer to entry points or seats, at least one means of support for transferring shall be provided....
-
11B-409.3.2 Location
Elevator car doors or gates shall be positioned at the narrow end of the clear floor spaces required by Section 11B-409.4.1....
-
206.4.1 Public Entrances
In addition to entrances required by 206.4.2 through 206.4.9, at least 60 percent of all public entrances shall comply with 404....
-
407.3.3.2 Contact
The device shall not require physical contact to be activated, although contact is permitted to occur before the door reverses....
-
227.5 Queues and Waiting Lines
Queues and waiting lines servicing counters or check-out aisles required to comply with 904.3 or 904.4 shall comply with 403....
-
804.6.5.2 Bottom-Hinged Door Ovens
Bottom-hinged door ovens shall have the work surface required by 804.3 positioned adjacent to one side of the door....
-
1008.4.5 Transfer Supports
Where play components require transfer to entry points or seats, at least one means of support for transferring shall be provided....
-
215.5 Residential Facilities
Where provided in residential dwelling units required to comply with 809.5, alarms shall comply with 702....
-
409.3.2 Location
Elevator car doors or gates shall be positioned at the narrow end of the clear floor spaces required by 409.4.1....
-
§35.150 Existing Facilities
Thus, although title II may not require removal of barriers in some cases where removal would be required under title III, the program access requirement of title II should enable individuals...