5.4.5 Transfer Support Position for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position....
Search Results "Transfer Seat (Amusement)"
-
5.4.5 Transfer Support Position for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position
-
Access-Able Designs Tub Transfer Bench SH-414-LR
This seat requires a minimum of 2" tub ledges to rest on (both sides). Folds up easily when not in use. Measures 29" W x 15" D x 21"D....
-
Two Step Transfers Attainable Heights
Among the participants that were able to complete the two step transfers, the 5th percentile were able to transfer to a second platform that was 3 inches higher than the first platform for...
-
A. Arena Assembly Seating:
At least one (1) companion seat (“Companion Seat”) shall be provided for each Wheelchair Seat. ...
-
11B-610.3.2 L-shaped seats
The rear edge of an L-shaped seat shall be 2½ inches (64 mm) maximum and the front edge 15 inches (381 mm) minimum and 16 inches (406 mm) maximum from the seat wall....
-
M305.2.1.2 Side Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.2 shall be capable of supporting transfer on each side of the transfer surface....
-
11B-610 SEATS
[See subsections ...]
-
11B-610 Seats
[See subsections ...]
-
Conclusions
transfers. ...
-
1. Transfer Supports
The MDE NPRM proposed requirements for transfer supports that applied to all transfer surfaces (proposed M305.2)....
-
M305.2.2.1 End Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.1 and M305.2.2.1 shall be 15 inches (380 mm) long minimum....
-
TRANSFER STALLS
[See subsections ...]
-
M305.2.1.1 End Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.1 and M302.2 shall be located on the short side (length) opposite the transfer side....
-
Seat “Blocking” Method
Seat “Blocking” Method Carriers may “block” an adequate number of seats to provide the seating accommodations discussed above....
-
M305.2.2.2 Side Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.2 shall be 28 inches (710 mm) long minimum and shall be positioned along the width of transfer surfaces....
-
11B-610.3 Shower compartment seats
[2010 ADAS] 610.3 Shower Compartment Seats. ...
-
11B-610.3 Shower compartment seats
11B-610.3 Shower compartment seats....
-
Wingits Reversible L-shaped 26" x 22.5" Shower Seat
The WingIts® Reversible L Shaped 26" x 22.5" Shower Seat Benefits: ADA compliant - Exceeds all building codes for ADA and 2010 ASAAG and 2009 ANSI Standards Comfort and...
-
F206.7.7 Amusement Rides
Platform lifts shall be permitted to provide accessible routes to load and unload areas serving amusement rides....
-
206.7.7 Amusement Rides
Platform lifts shall be permitted to provide accessible routes to load and unload areas serving amusement rides....
-
5.1 Transfer Surface Height Recommendations
5.1 Transfer Surface Height Recommendations Description: The transfer height is set above the finished floor surface to permit transfers form mobility devices onto the transfer surface...
-
1009.5.4 Transfer Steps
1009.5.4 Transfer Steps. Transfer step height shall be 8 inches (205 mm) maximum....
-
Mayer-Rothschild Foundation: Determination of Grab Bar Specifications for Independent and Assisted Transfers in Residential Care Settings
identify, both objectively and subjectively, the spatial and configurational dimensions of grab-bars that effectively support both independent standing and one- and two-person assisted toilet transfers...
-
221.5 Lawn Seating
221.5 Lawn Seating. Lawn seating areas and exterior overflow seating areas, where fixed seats are not provided, shall connect to an accessible route....
