Search Results "Proposed Standard"
Filters
Commonly Searched Documents
-
ASA Standards Store
-
2) Where the Standard says "Changes in level are not permitted"
2) Where the Standard says "Changes in level are not permitted", such as 304.2 for turning spaces: Here the standard is followed by an unenforceable advisory that says, "As used in this...
-
Standards that exclude an entire class of individuals with disabilities
Standards that exclude an entire class of individuals with disabilities "Blanket" exclusions of this kind usually have been established because employers believed them to be necessary...
-
Guidance on the 2010 ADA Standards for Accessible Design
Guidance on the 2010 ADA Standards for Accessible Design Reproduction of this document is encouraged....
-
11B-608.2.2 Standard roll-in type shower compartments
Standard roll-in type shower compartments shall be 30 inches (762 mm) wide minimum by 60 inches (1524 mm) deep minimum clear inside dimensions measured at center points of opposing sides...
-
608.2.2 Standard Roll-In Type Shower Compartments
Standard roll-in type shower compartments shall be 30 inches (760 mm) wide minimum by 60 inches (1525 mm) deep minimum clear inside dimensions measured at center points of opposing sides...
-
ABA Accessibility Standard for GSA Facilities Pocket Guide
Pocket Guide to the ABA Accessibility Standard for GSA Facilities With Selected Sections from GSA’s Federal Management Regulation Final Rule Adopting GSA’s ABA Accessibility Standard...
-
1) Where the Standard specifically refers to 303
1) Where the Standard specifically refers to 303, such as 403.4 changes in level for walking surfaces: Here it is clear that changes in level that comply with either the ¼" maximum vertical...
-
§1630.10(b) Qualification standards and tests related to uncorrected vision
(b) Qualification standards and tests related to uncorrected vision....
-
F105 Referenced Standards
[See subsections ...]
-
2010 ADA Standards
104.1.1 Construction and Manufacturing Tolerances. All dimensions are subject to conventional industry tolerances except where the requirement is stated as a range with specific...
-
1991 ADA Standards
3.2 Dimensional Tolerances. All dimensions are subject to conventional building industry tolerances for field conditions.
-
406 Standard Connections
[See subsections ...]
-
Implication for Standards and Design
Close to 200 community dwelling adults who independently transfer have been evaluated during phases 1 and 2 combined of this multi-year study. The main difference between phase 1...
-
406 Standard Connections
[See subsections ...]
-
II. LEGAL STANDARD
Summary judgment is only appropriate where the “materials in the record, including depositions, documents, electronically stored information, affidavits or declarations, stipulations...
-
Guide to the ADA Standards
[See subsections ...]
-
3.3 Comparison of Dimensions with Standards and other Anthropometric Studies
3.3 Comparison of Dimensions with Standards and other Anthropometric Studies...
-
Section 36.406(b) Application of Standards to Fixed Elements
Section 36.406(b) Application of Standards to Fixed Elements The final rule contains a new Sec. 36.406(b) that clarifies that the requirements established by this section, including those...
-
11B-608.5.2 Standard roll-in type shower compartments
In standard roll-in type shower compartments, operable parts of controls and faucets shall be installed on the back wall of the compartment adjacent to the seat wall 19 inches (483 mm) minimum...
-
11B-608.5.2 Standard roll-in type shower compartments
11B-608.5.2 Standard roll-in type shower compartments....
-
Elevator Exception 1—Section 206.2.3 of the 2010 Standards
The 2010 Standards contain specific exceptions to the general provision requiring at least one accessible route to connect each story and mezzanine in multi-story buildings or facilities...
-
Tactile and Visual Signs [ADA Standards §216.2, §216.4.1]
Tactile and Visual Signs [ADA Standards §216.2, §216.4.1] The IBC requires exits and exit access doors to be marked by illuminated exit signs (§1011, §1003.2.10)....
-
2022 California Standards for Accessible Design Guide
Including selected excerpts from the Americans with Disabilities Act and Safe Harbor criteria Effective January 1, 2023 Version 1.0 COMPILED and © 2023 by EVAN TERRY...