Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the support rail, fastener, mounting...
Search Results "Operation (Elevator)"
Commonly Searched Documents
-
11B-407.4.10.3 Structural strength
-
11B-407.4.10.1 Location
Clearance between support rails and adjacent surfaces shall be 1½ inches (38 mm) minimum. Top of support rails shall be 31 inches (787 mm) minimum to 33 inches (838 mm) maximum above...
-
11B-407.4.10.2 Surfaces
Support rails shall be smooth and any surface adjacent to them shall be free of sharp or abrasive elements.
-
216.7 Elevators
216.7 Elevators....
-
11B-407.4.7.1.3 Symbols
TABLE 11B-407.4.7.1.3 ELEVATOR CONTROL BUTTON IDENTIFICATION Control Button Tactile Symbol Braille Message Emergency Stop...
-
T304.2 Height
Operable parts shall be located 24 inches (610 mm) minimum and 48 inches (1220 mm) maximum above the floor of non-rail vehicles....
-
§ 382.57(c)(3) Operable parts
(3) Operable parts. Operable parts must comply with section 309 of the 2010 ADA Standards, and the following requirements:...
-
Connected Elevated Components
Connected Elevated Components When transfer systems are used, an elevated play component may connect to other elevated play components, providing an innovative, accessible route....
-
Savaria ORION Limited Use/Limited Application Elevator
Requires the Premium User plan or above. (Login or upgrade your account!)
-
Frequency: ADA Standard Section 407.4.8.2.3
Section 407.4.8.2.3 covers the current ADA Standards for the frequency of audible elevator car indicators.
-
Common Questions (Elevators and Platform Lifts)
Common Questions
-
Controls and Equipment
Controls and Equipment Access requirements apply to fixed controls and operating mechanisms intended for independent use by patients....
-
11B-228.3.1.2 Operable parts
Where EV chargers are provided, operable parts on all EV chargers shall comply with Section 11B-309.4 _|Operation|_....
-
1008.2.5.2 Elevated
1008.2.5.2 Elevated. The rise for any ramp run connecting elevated play components shall be 12 inches (305 mm) maximum....
-
F216.7 Elevators
Where existing elevators do not comply with 407, elevators complying with 407 shall be clearly identified with the International Symbol of Accessibility complying with 703.7.2.1....
-
216.7 Elevators
Where existing elevators do not comply with 407, elevators complying with 407 shall be clearly identified with the International Symbol of Accessibility complying with 703.7.2.1....
-
11B-411.2.1.4.1.1 Arrangement
Buttons shall be arranged in columns to the right of the keypad with a minimum horizontal spacing of 1.5 times the horizontal spacing between the numeric keys and with the same...
-
11B-407.4.7.1.4 Visible indicators
Buttons with floor designations shall be provided with visible indicators to show that a call has been registered. The visible indication shall extinguish when the car arrives at the...
-
407.2.1.5 Signals
Destination-oriented elevators shall not be required to comply with 407.2.1.5 provided that visible and audible signals complying with 407.2.2 indicating which elevator car to enter are...
-
407.2.1.5 Signals
Destination-oriented elevators shall not be required to comply with 407.2.1.5 provided that visible and audible signals complying with 407.2.2 indicating which elevator car to enter are...
-
407.2.1.5 Signals
Destination-oriented elevators shall not be required to comply with 407.2.1.5 provided that visible and audible signals complying with 407.2.2 indicating which elevator car to enter are...
-
409 Private Residence Elevators
[See subsections ...]
-
409 Private Residence Elevators
[See subsections ...]
-
407.2.2.2 Visible Signals
Destination-oriented elevators shall be permitted to have signals visible from the floor area adjacent to the hoistway entrance. 2....