Corada

Clearances at power-assisted doors and gates shall comply with 404.2.4....

(a) Any stepwell or doorway immediately adjacent to the driver shall have, when the door is open, at least 2 foot-candles of illumination measured on the step tread....

404.3.2 Maneuvering Clearance

Clearances at power-assisted doors and gates shall comply with 404.2.4....

404.3.2 Maneuvering Clearance

Clearances at power-assisted doors and gates shall comply with 404.2.4....

408.3 Elevator Doors

408.3 Elevator Doors. Elevator hoistway doors shall comply with 408.3....

Door Swing: ADA Standard Section 803.3

Doors shall not swing into the room unless a clear floor or ground space complying with 305.3 is provided beyond the arc of the door swing....

2. Door Hardware

Is the bathroom door hardware (levers, pulls, etc.) easily operable with one hand, without tight grasping, pinching or twisting of the wrist, since many persons with disabilities may not...

408.3.1 Sliding Doors

408.3.1 Sliding Doors. Sliding hoistway and car doors shall comply with 407.3.1 through 407.3.3 and 408.4.1....

11B-809.8 Doors

Primary entry doors, required exit doors, secondary exterior doors and interior doors intended for user passage shall comply with this section and Section 11B-404.2....

A4.10.7 Door and Signal Timing for Hall Calls

This paragraph allows variation in the location of call buttons, advance time for warning signals, and the door-holding period used to meet the time requirement....

A4.10.7 DOOR AND SIGNAL TIMING FOR HALL CALLS

This paragraph allows variation in the location of call buttons, advance time for warning signals, and the door-holding period used to meet the time requirement....

Stanley Magic-Force™ Full or Low Energy Swing Door Operator

The operator requires only simple tune-in adjustments for fast, trouble-free installation and surface mount header models afford fast and easy retrofits to manual doors....

11B-809.8.1 Door Thresholds

Secondary exterior door thresholds, including sliding door tracks, shall be 3/4 inch (19.1 mm) high maximum with a 1:2 maximum slope....

B. Measuring Clear Passage at Doors

Verifying the clear passage width at standard hinged doors requires an understanding of exactly where to measure....

4.10.7* Door and Signal Timing for Hall Calls

The minimum acceptable time from notification that a car is answering a call until the doors of that car start to close shall be calculated from the following equation: T = D/(1.5 ft/...

4.10.7* DOOR AND SIGNAL TIMING FOR HALL CALLS

The minimum acceptable time from notification that a car is answering a call until the doors of that car start to close shall be calculated from the following equation: T = D or T = D...

4.35.3 Doors

All doors to accessible dressing rooms shall be in compliance with section 4.13....

404 Doors, Doorways, and Gates

[See subsections ...]

404 Doors, Doorways, and Gates

[See subsections ...]

404 Doors, Doorways, and Gates

[See subsections ...]

404 Doors, Doorways, and Gates

[See subsections ...]

404 Doors, Doorways, and Gates

[See subsections ...]