(n=72) 24.6 18.0 18.0 18.0 18.0 18.0 28.0 Protocol A: No Grab...
Search Results "Grab Bars"
Filters
Commonly Searched Documents
-
Preferred Seat Widths
-
5. Toilet centerline
Toilet centerline: The toilet bowl needs to be centered 18 inches from the side wall, so that inmates with disabilities can use the side grab bar....
-
903.4 Back Support
To assist in transferring to the bench, consider providing grab bars on a wall adjacent to the bench, but not on the seat back....
-
903.4 Back Support
To assist in transferring to the bench, consider providing grab bars on a wall adjacent to the bench, but not on the seat back....
-
Highest and Lowest Heights Obtained
The 50th percentile participants were able to transfer to a simple platform (no grab bars or a backrest present) that was 28 inches high with respect to the floor and 14 inches low relative...
-
11B-233.3.1.2.6.5 Additional requirements.
Grab bar reinforcement complying with Sections 11B-809.10.5.2, 11B-809.10.6.4, or 11B-809.10.7.3. 2. Interior door opening width complying with Section 11B-404.3.1. 3....
-
H23
Is the door to the toilet stall located diagonally opposite, not directly in front of, the toilet or on the opposite side wall from the wall with the long grab bar?...
-
Bradley 1-Stall Seat Cover/Tissue Dispenser 5922
Model 5922, 5922-10, 5922-11, 5922-69 Model 5922 recessed (shown, clearance for grab bar) BradEX Model 5922-10 semi-recessed (recesses 2-3/4"; projects 1-1/2" - single...
-
608 Shower Compartments
Section 608 addresses transfer showers and roll-in showers and provides specifications for size and clearances, grab bars, seats, operable parts, shower spray units, thresholds, and enclosures...
-
Evaluation of transfers
There was a high frequency of lateral grab bar use and front grab bar/lateral grab bar together upon initial hand placement....
-
1607.8 Loads on handrails, guards, grab bars, shower seats, dressing room bench seats and vehicle barriers
[See subsections ...]
-
1607.8 Loads on handrails, guards, grab bars, shower seats, dressing room bench seats and vehicle barriers
[See subsections ...]
-
Hager Companies Round Push/Pull Bar Set 170D
Round Push/Pull Bar Set 170D Notes: - Bars are mounted BTB with 1/4''-20 thru-bolt type 4 mounting - Non-reversible; specify handing Materials: - Aluminum, brass, bronze,...
-
11B-604.3.2 Overlap
The required clearance around the water closet shall be permitted to overlap the water closet, associated grab bars, dispensers, sanitary napkin disposal units, coat hooks, shelves, accessible...
-
Q3.) What are the types of “manufacturing processes” that were anticipated where the advisory says “tolerances recognized by this provision include… “those that may be a necessary consequence of a particular manufacturing process”?
Similarly, the surfaces of ceramic tiles that form the wall behind a grab bar will not be perfectly flat due the manufacturing processes that make them. ...
-
Seat Width Evaluation
available in this study and was suitable for many participants (the 25th through 95th percentiles) for their level, highest and lowest height transfer regardless of the presence or absence of grab...
-
11B-608.5.2 Standard roll-in type shower compartments
bar, but no higher than 48 inches (1219 mm) above the shower floor, with their centerline at 39 inches (991 mm) to 41 inches (1041 mm) above the shower floor....
-
4.34.4 CONSUMER INFORMATION
(2) Notification of the provisions for the installation of grab bars at toilets, bathtubs, and showers....
-
11B-608.5.2 Standard roll-in type shower compartments
bar, but no higher than 48 inches (1219 mm) above the shower floor, with their centerline at 39 inches (991 mm) to 41 inches (1041 mm) above the shower floor....
-
§382.63(a)(3)
(3) The lavatory shall provide door locks, accessible call buttons, grab bars, faucets and other controls, and dispensers usable by qualified individuals with a disability, including wheelchair...
-
Adaptability
The ability of certain building spaces and elements, such as kitchen counters, sinks, and grab bars, to be added or altered so as to accommodate the needs of individuals with or without...
-
Hager Companies Round Push/Pull Bar Set 164D-V-B
Round Push/Pull Bar Set 164D-V-B D = Standard Fastening: - One (1) Type 7 spanner collar connection between push bar and pull plus two (2) Type 1 connections for other ends of...
-
Hager Companies Round Push/Pull Bar Set 150D-V-B
Round Push/Pull Bar Set 150D-V-B D = Standard Fastening: - One (1) Type 7 spanner collar connection between push bar and pull plus two (2) Type 1 connections for other ends of...
-
Hager Companies Round Push/Pull Bar Set 156D-V-B
Round Push/Pull Bar Set 156D-V-B D = Standard Fastening: - One (1) Type 7 spanner collar connection between push bar and pull plus two (2) Type 1 connections for other ends of...
