Penetrations of horizontal assemblies without a required fire-resistance rating shall meet the requirements of Section 707 or shall comply with Sections 711.4.3.1 through 711.4.3.2....
Search Results "Best Meets"
Filters
Commonly Searched Documents
-
711.4.3 Nonfire-resistance-rated assemblies
-
3(1)
(1) On accessible routes in public and common use areas, and for primary entry doors to covered units, doors that comply with ANSI 4.13 would meet this requirement....
-
4.13.4 Double-Leaf Doorways
If doorways have two independently operated door leaves, then at least one leaf shall meet the specifications in 4.13.5 and 4.13.6. That leaf shall be an active leaf....
-
4.13.4 DOUBLE-LEAF DOORWAYS
If doorways have two independently operated door leaves, then at least one leaf shall meet the specifications in 4.13.5 and 4.13.6. That leaf shall be an active leaf....
-
§ 37.7(a)
(a) For purposes of this part, a vehicle shall be considered to be readily accessible to and usable by individuals with disabilities if it meets the requirements of this part and the standards...
-
Section 36.208(c) (Section-By-Section Analysis and Response to Comments)
A public accommodation is required to make an individualized assessment, based on reasonable judgment that relies on current medical evidence or on the best available objective evidence,...
-
Primary Function
Areas that contain a primary function include, but are not limited to, [the customer services lobby of a bank, 36.403(b)], the dining area of a cafeteria, the meeting rooms in a conference...
-
Scoping Requirements
Scoping requirements for signs in section 216 cover room designations, which are required to be tactile, and directional and informational signs which are not required to be tactile but must meet...
-
Dissemination activities
Toro-Hernandez ML, De Luigi AJ, Cooper RA, Relationship between Physical Function and the Performance of Independent Transfers in SCI Population, Association of Academic Physiatrists Annual Meeting...
-
11B-221.3 Companion seats
When designing, best practice is to locate wheelchair spaces in rows where seating for a minimum of four is provided....
-
[F] 907.5.2.3.1 Public and common use areas
Music practice rooms Band rooms Multipurpose rooms Occupational shops Occupied rooms where ambient noise impairs hearing of the fire alarm Meeting...
-
4. Do the carpet requirements of Section 302.2 apply to ground level accessible routes within a play area?
Accessible playground surfaces, including turf-like surfaces, must meet the requirements of ASTM F 1951-99....
-
Paperwork Reduction Act
Under this rule, railroads that choose to use a means of meeting the performance standard other than level-entry boarding would have to submit a proposed plan to FRA or FTA demonstrating...
-
Required Compliance [§210]
Required Compliance [§210] Interior and exterior stairs that are part of a required means of egress must meet the Standards....
-
Mockett TLRAL27 Roma Series Adjustable Table Leg
We call this beauty the "Roma Leg" because its fine design and unique action reminds us of the best furniture components from Italy....
-
§382.133(e)(1)
(1) Any applicable requirement for a manufacturer-affixed label to reflect that the device has been tested to meet applicable FAA requirements for medical portable electronic devices;...
-
§382.133(c)(1)
(1) A portable oxygen concentrator (POC), a ventilator, a respirator or a continuous positive airway pressure machine that displays a manufacturer's label that indicates the device meets...
-
F202.6.5.2 Fire Alarms
EXCEPTION: Fire alarms shall not be required to comply with 702 where existing power sources must be upgraded to meet the requirement....
-
Q4.) Are conditions like door closers that require force in excess of the maximum allowed by the standards considered true tolerances or are they simply non-compliance with the maintenance requirements of 35.133 or 36.211?
In our opinion, the plain language of the term “Construction and Manufacturing Tolerances” does not include adjustable conditions that can meet the detailed requirements when properly maintained...
-
§104.6(c)(1)(ii)
(ii) Modify, after consultation with interested persons, including handicapped persons or organizations representing handicapped persons, any policies and practices that do not meet the...
-
Who is Protected
To be protected under the ADA a person needs to meet the ADA’s definition of disability and be “qualified.”...
-
§104.33(b)(2)
(2) Implementation of an Individualized Education Program developed in accordance with the Education of the Handicapped Act is one means of meeting the standard established in paragraph ...
-
§ 36.601 Preliminary determination of equivalency
Preliminary determination of equivalency means a preliminary determination that a code appears to meet or exceed the minimum requirements of title III of the Act for accessibility and usability...
-
E1-4. Accessible Route Slope
Where the slope of the accessible route is greater than 1:20, does this part of the accessible route meet the following requirements for an accessible ramp? Yes _____ No _____...
