(ii) Where an existing swimming pool has less than 300 linear feet of swimming pool wall, it shall be exempt from the provisions of section 242.2 of the proposed standards; and...
Search Results "ANSI/IEEE: American National Standards Institute/ Institute of Electrical and Electronics Engineers"
Filters
Commonly Searched Documents
-
§ 35.150(b)(5)(ii)
-
H11
[ADA Standards § 4.19.6] Yes No...
-
H23
[ADA Standards § 4.17.3] Yes No...
-
J4
[ADA Standards §§ 4.15.3 and 4.15.4] Yes No...
-
C1-c
[ADA Standards § 4.3.3] Yes No If No, does the accessible route narrow to 32 inches for no more than 2 feet?...
-
§ 36.406(e)(2)
Multi-bedroom housing units containing accessible sleeping rooms with mobility features shall have an accessible route throughout the unit in accordance with section 809.2 of the 2010 Standards...
-
§ 36.406(d)(1)
(1) In sleeping rooms with more than 25 beds covered by this section, a minimum of 5% of the beds shall have clear floor space complying with section 806.2.3 of the 2010 Standards....
-
Maintenance
Routine or periodic repair of trails or trail segments to restore them to the standards to which they were originally designed and built. ...
-
Must operable parts be usable with a closed fist?
Closed-fist operation is a good performance test but is not required by the standards....
-
Can audible signals for an elevator operate only when needed by a passenger who needs them through activation of dedicated “accessibility” control?
Requiring passengers to manually activate such signals when needed is not permitted by the ADA Standards....
-
§ 35.151(e)(1)
(1) In sleeping rooms with more than 25 beds covered by this section, a minimum of 5% of the beds shall have clear floor space complying with section 806.2.3 of the 2010 Standards....
-
§ 35.151(f)(2)
Multi-bedroom housing units containing accessible sleeping rooms with mobility features shall have an accessible route throughout the unit in accordance with section 809.2 of the 2010 Standards...
-
11B-407.4.6.2 Buttons
[2010 ADA Standards] EXCEPTION: In existing elevators, buttons shall be permitted to be recessed....
-
11B-407.2.3.2 Reserved
Editor's Note Imposing additional requirements regarding characters and colors, the preceding CBC requirements pertaining to elevator hoistway signs are more stringent than 2010 ADA Standards...
-
Guest Rooms with Communication Features: ADA Standard Section 806.3
For headset or external amplification system compatibility, a standard subminiature jack installed in the telephone will provide the most flexibility....
-
Dimensions: ADA Standard Section 810.2.2
Access Board’s Note to Reader: The Department of Transportation’s ADA standards indicate that compliance is required to the extent construction specifications are within a public entity's...
-
11B-209.2.1 Passenger drop-off and loading zones
[2010 ADA Standards] 209.2.1 Passenger Loading Zones....
-
11B-604.8.1.5 Grab bars
[2010 ADA Standards] 604.8.1.5 Grab Bars. Grab bars shall comply with 609....
-
[ADA Title III §36.402(c)] To the maximum extent feasible
feasible," as used in this section, applies to the occasional case where the nature of an existing facility makes it virtually impossible to comply fully with applicable accessibility standards...
-
11B-802.4.2 Identification
[2010 ADA Standards] 802.4.2 Identification. Each designated aisle seat shall be identified by a sign or marker. Advisory 11B-802.4.2 Identification....
-
11B-405.9 Edge protection
[2010 ADA Standards] 405.9 Edge Protection. Edge protection complying with 405.9.1 or 405.9.2 shall be provided on each side of ramp runs and at each side of ramp landings....
-
11B-704.2.1.2 Forward approach
[2010 ADA Standards] 704.2.1.2 Forward Approach....
-
406.2.2 Clear height
While the minimum height is required to be 7'-0" by this section, greater vertical clearance is required at van-accessible parking spaces, standard accessible parking spaces, the vehicular...
-
Manufacturer (Section-by-Section Analysis)
The National Association of the Deaf recommended that the definition of manufacturer be flexible so that it does not unduly restrict the type of entity that is covered by section 255....