Call buttons in elevator lobbies and halls shall be centered at 42 in (1065 mm) above the floor....
Search Results "Extended Floor Surface"
Filters
Commonly Searched Documents
-
4.10.3 Hall Call Buttons
-
4.13.9* Door Hardware
Hardware required for accessible door passage shall be mounted no higher than 48 in (1220 mm) above finished floor....
-
4.10.3 HALL CALL BUTTONS
Call buttons in elevator lobbies and halls shall be centered at 42 in (1065 mm) above the floor....
-
Safety Considerations for Site Selection
When possible, request meeting rooms on the ground floor with direct accessible paths to the outside....
-
4.30.6 Mounting Location and Height
Mounting height shall be 60 in (1525 mm) above the finish floor to the centerline of the sign....
-
4.10.6* DOOR PROTECTIVE AND REOPENING DEVICE
device shall be capable of completing these operations without requiring contact for an obstruction passing through the opening at heights of 5 in and 29 in (125 mm and 735 mm) from the floor...
-
11B-1008.4.3 Play tables
Exception: Play tables designed and constructed primarily for children 5 years and younger shall not be required to provide knee clearance where the clear floor or ground space required...
-
11B-604.9.6 Dispensers
The outlet of the dispenser shall be 14 inches (356 mm) minimum and 19 inches (483 mm) maximum above the finish floor....
-
11B-809.7 Accessible routes
The accessible route shall adjoin or overlap clear floor spaces and connect all exterior doors....
-
11B-1008.4.3 Play tables
Exception: Play tables designed and constructed primarily for children 5 years and younger shall not be required to provide knee clearance where the clear floor or ground space required...
-
Access-Able Designs Shower Transfer Bench SH-400-2SDL
Stainless steel frame holds over 900 lbs. with proper mounting and sufficient flooring (ADA 4.26.3 is only 250 lbs.)...
-
BraunAbility Vista 2 Wheelchair Lift for School Buses, Cutaway Buses, and Paratransit Vans
Features include: NHTSA Compliant 800 lifting capacity Floor to ground lift heights up to 48" Excellent reliability and durability Easily installed...
-
What Terminology Should Be Used?
Disability Etiquette Use common sense and extend common courtesy to everyone. Don't patronize anyone; treat adults like adults. Be patient....
-
Mounting Height and Location
As a result, the height of braille and raised characters are held to the same range: 48 to 60 inches above the floor or ground (703.4.1)....
-
III-7.5170 Telephones
telephones and need "text telephones" (referred to in the Department's rule as telecommunication devices for the deaf (TDD's)): 1) One accessible public phone must be provided for each floor...
-
11B-604.8.1.1 Size
shall be 60 inches (1524 mm) wide minimum measured perpendicular to the side wall, and 56 inches (1422 mm) deep minimum for wall hung water closets and 59 inches (1499 mm) deep minimum for floor...
-
11B-608.5.3 Alternate roll-in type shower compartments
The controls, faucets, and shower spray units shall be located above the grab bar, but no higher than 48 inches (1219 mm) above the shower floor....
-
BHMA
Builders Hardware Manufacturers’ Association 355 Lexington Avenue, 15th Floor New York, NY 10017-6603 A 156.10-2011: Power Operated Pedestrian Doors 1010.1.4.2, 11B-404.2.9,...
-
Midmark 625 Barrier-Free® Power Examination Table
Patient Weight Capacity: 650 lb (295 kg) Height: Minimum 18" (46 cm) Maximum 37" (94 cm) Premium Upholstery Dimensions (top): 28" W x 59.5" L (71 cm x 151 cm) Length with footrest extended...
-
Physical Accessibility
For example, if stairs lead to the upper floors of a school and the school does not have an elevator, ramp, or chair lift, and a student with a disability is unable to traverse the stairs...
-
AJW Architectural Products UG30-A Series UG30-A12 12" Concealed Set Screw Flange, 1.5" Diameter Grab Bar - Configuration A
Recommended mounting heights for grab bars are 33" - 36" centerline above finished floor. All mounting of grab bars when possible should have in wall mounting back plates....
-
AJW Architectural Products UG20-A Series UG20-A12 12" Concealed Set Screw Flange, 1.25" Diameter Grab Bar - Configuration A
Recommended mounting heights for grab bars are 33" - 36" centerline above finished floor. All mounting of grab bars when possible should have in wall mounting back plates....
-
Medical Device Manufacturers
Many medical device manufacturers currently incorporate accessible features in some of their products such as patient support surfaces that are height adjustable, transfer and positioning...
-
Good Practices of Accessible Urban Development: Making Urban Environments Inclusive and Fully Accessible to ALL
planning, allocation of necessary resources, and a broad-based partnership that involves and engages all community members, including persons with disabilities. 1 The authors would like to extend...
