Access for “approach, entry, and exit” requires a connecting accessible route to the work area and a compliant entrance, including entry doors or gates, plus wheelchair space in the work...
Search Results "Loss of Productive Space"
-
Access to Approach, Enter, and Exit Work Areas
-
11B-1008.4.4 Entry points and seats
Where play components require transfer to entry points or seats, the entry points or seats shall be 11 inches (279 mm) minimum and 24 inches (610 mm) maximum from the clear floor or ground space...
-
11B-407.4.7.1.2 Location
[2010 ADA Standards] EXCEPTION: Where space on an existing car operating panel precludes tactile markings to the left of the controls, markings shall be placed as near to the control...
-
11B-1008.4.4 Entry points and seats
Where play components require transfer to entry points or seats, the entry points or seats shall be 11 inches (279 mm) minimum and 24 inches (610 mm) maximum from the clear floor or ground space...
-
5. BENEFITS DISCUSSION
The Department believes that this rule will benefit persons who are deaf or hard of hearing, or blind or have low vision, as well as those with moderate hearing loss who do not currently...
-
Tent Pads and Tent Platforms
Provide a minimum 48-inch (1,220-millimeter) clear floor or ground space on all sides of tents on tent pads and platforms that are required to be accessible....
- Accessible Resources for Independence, Inc. (ARI) - Glen Burnie, MD
- Neurofibromatosis Network
-
Expert Report of James L.E. Terry, Evan Terry Associates, LLC (August 9, 2018)
Alexander Deussen Park Senior Center, 12303 Sonnier Street, Houston, TX Parking: The surface slope in the designated accessible parking space and access aisle is not level in all...
-
3.15
3.15 Nothing in this Consent Order shall limit the placement of any additional wheelchair spaces required by state or local codes beyond those mandated under the ADA Standard 4.33.3 and...
-
Technical Requirements
The Board agrees and has relocated these provisions to a new technical section in Chapter 8 (Special Rooms, Spaces, and Elements) at section 808 that is specific to courtrooms....
-
R215 Passenger Loading Zones (Section-by-Section Analysis)
Loading Zones (Section-by-Section Analysis) Where passenger loading zones are provided, at least one passenger loading zone for each 30 meters (100 feet) of continuous loading zone space...
-
Direct Connections
This is not intended to increase the number of entrances planned where a building entrance serves more than one of these spaces....
-
§ 38.113(a)(1)
(1) At least one doorway, on each side of the car from which passengers board, of each car required to be accessible by §38.111(a) and where the spaces required by §38.111(d) of this part...
- Sloan AD-83 Three Station AER-DEC Integrated Sink with Faucet, Soap Dispenser and Hand Dryer
- Sloan AD-81 Single Station AER-DEC Integrated Sink with Faucet, Soap Dispenser and Hand Dryer
- Sloan AD-82 Two Station AER-DEC Integrated Sink with Faucet, Soap Dispenser and Hand Dryer
- Sloan AD-84 Four Station AER-DEC Integrated Sink with Faucet, Soap Dispenser and Hand Dryer
-
Section 36.304 Removal of Barriers (Section-By-Section Analysis and Response to Comments)
As stated in Sec.36.304(f), such actions are not readily achievable to the extent that they would result in a significant loss of selling or serving space....
-
11B-806.2 Guest rooms with mobility features
The requirements in 806.2 do not include requirements that are common to all accessible spaces....
-
1003.3 Clearances
Although the minimum width of the clear pier space is 60 inches (1525 mm), it is recommended that piers be wider than 60 inches (1525 mm) to improve the safety for persons with disabilities...
-
1003.3 Clearances
Although the minimum width of the clear pier space is 60 inches (1525 mm), it is recommended that piers be wider than 60 inches (1525 mm) to improve the safety for persons with disabilities...
-
R405.3.3 Minimum Required Depth
Where knee clearance is required under an element as part of a clear space, the knee clearance shall be 280 mm (11 in) deep minimum at 230 mm (9 in) above the finish surface, and 205 mm...