Power operated doors and gates shall remain open for 20 seconds minimum when activated....
Search Results "NCHPD: National Center on Physical Activity and Disability"
-
11B-409.3.1 Power operation
-
11B-602.3 Operable parts
The flow of water shall be activated by a manually operated system that is front mounted or side mounted and located within 6 inches (152 mm) of the front edge of the fountain or an automatic...
-
11B-409.3.1 Power operation
Power operated doors and gates shall remain open for 20 seconds minimum when activated....
-
204.1 General
Within areas of sport activity, protruding objects on circulation paths shall not be required to comply with 307. 2....
-
1008.2.6 Ground Surfaces
The type of surface material selected and play area use levels will determine the frequency of inspection and maintenance activities....
-
809.5.5.1 Notification
Activation of the button or switch shall initiate an audible tone and visible signal within the residential dwelling unit....
- U.S. Department of Justice (DOJ)
-
2.2.6 Door Use
The door use tasks required the use of three different doors in the building housing the IDeA Center....
-
5. The Agreements Lacks Any Mechanism for Monitoring Compliance
Trickey, 840 F.2d 604, 608 (8th Cir. 1988) (affirming district court's approval of prisoners' class action challenging conditions at correctional center when settlement agreement provided...
-
Keynote Address: Definition of Low Vision and its Impact on Accessibility and Performance
.: Professor, Lions Low Vision Research and Rehabilitation Center, Johns Hopkins School of Medicine Henry Green: Our next presentation is by Professor Massof....
-
3.3 Need for "Overriding" Principle
The principle used by the Lexington Rehabilitation Engineering Research Center (RERC) was to emphasize the integrity of the sound signal as it is delivered through earphones by focusing...
-
1.1.7 Measurement of parking areas
This means that the overall slope in the long dimension should be measured along the center of the aisle or zone using the ends of the area as elevation measuring points and cross slope...
-
§ 38.159(d)(4) Orientation
barrier shall extend from a height of 38 inches (965 mm) from the vehicle floor to a height of 56 inches (1420 mm) from the vehicle floor with a width of 18 inches (455 mm), laterally centered...
-
11B-101.1 General
This chapter contains scoping and technical requirements for accessibility to sites, facilities, buildings, and elements by individuals with disabilities....
-
11B-101.1 General
This chapter contains scoping and technical requirements for accessibility to sites, facilities, buildings, and elements by individuals with disabilities....
- Pilot Rock Omega Bike Rack
-
T603 Wheelchair Securement Systems
A joint comment submitted by a consortium of transportation research centers urged the Access Board, for safety reasons, to restrict rear-facing wheelchair securement systems to large or...
-
407.3 Tactilely Discernible (Section-by-Section Analysis)
an exception to the requirement for tactile discernibility for touchscreen-based devices in today’s marketplace that have proven to be accessible to—and popular with—people with visual disabilities...
-
11B-228.3.2.1 Public use or common use EVCS
EVCS are not addressed by 2010 ADAS, although a case could be made, based on the general obligation for governments to make their services, programs or activities available to individuals...
-
Elevator requirement to new dining area on the mezzanine of an existing facility
areas, or to all parts of existing outdoor dining areas where the same services and decor are provided in an accessible space usable by the public and not restricted to use by people with disabilities...
-
11B-805.7 Built-in cabinets and work surfaces
Built-in cabinets, counters and work surfaces shall be accessible, including: patient wardrobes, nurse’s stations, administrative centers, reception desks, medicine preparation areas, laboratory...
-
11B-411.2.1.7.2 Assignment by touch screen hall call console
The size of the keypad shall be a nominal 4 inches (102 mm) wide by 5 inches (127 mm) high in a 12-key ascending telephone keypad layout centered in the console....
-
11B-411.2.1.7.2 Assignment by touch screen hall call console
The size of the keypad shall be a nominal 4 inches (102 mm) wide by 5 inches (127 mm) high in a 12-key ascending telephone keypad layout centered in the console....
-
11B-411.2.1.7.2 Assignment by touch screen hall call console
The size of the keypad shall be a nominal 4 inches (102 mm) wide by 5 inches (127 mm) high in a 12-key ascending telephone keypad layout centered in the console....