car start to close shall be calculated from the following equation: T = D/(1.5 ft/s) or T = D/(457 mm/s) = 5 seconds minimum where T equals the total time in seconds and D equals the distance...
Search Results "Travel Distance"
-
11B-407.3.4 Door and signal timing
-
11B-1002.5 Amusement ride seats designed for transfer
Where greater distances are required for transfers, providing gripping surfaces, seat padding, and avoiding sharp objects in the path of transfer will facilitate the transfer. ◼...
-
6.7.1.2
Resting intervals complying with section 2.3 shall be provided at distances of no more than 50 feet (15 m) apart....
-
6.7.1.3
Resting intervals complying with section 2.3 shall be provided at distances of no more than 30 feet (9 m) apart....
-
Air Carrier Access Act Technical Assistance Manual (2005)
What Airline Employees, Airline Contractors, and Air Travelers with Disabilities Need to Know About Access to Air Travel for Persons with Disabilities A Guide to the Air Carrier Access...
-
National Federation of the Blind - Free White Cane Program
It is a tool which allows blind people to travel where and when they want, and as such leads to self-sufficiency....
-
11B-502.7.1 Arrangement
Parking spaces and access aisles shall be designed so that persons using them are not required to travel behind parking spaces other than to pass behind the parking space in which they parked...
-
11B-502.7.1 Arrangement
Parking spaces and access aisles shall be designed so that persons using them are not required to travel behind parking spaces other than to pass behind the parking space in which they parked...
-
11B-502.7.1 Arrangement
Parking spaces and access aisles shall be designed so that persons using them are not required to travel behind parking spaces other than to pass behind the parking space in which they parked...
-
2. Using the Tape Measure
When measuring long distances, pull the tape tight to get an accurate measurement. The checklist will offer guidance for the specific measurement that is required....
-
11B-405.7.4 Change in direction
Ramps that change direction between runs at landings shall have a clear landing 60 inches (1525 mm) minimum by 72 inches (1829 mm) minimum in the direction of downward travel from the upper...
-
11B-405.3 Cross slope
Cross slope is the slope of the surface perpendicular to the direction of travel....
-
11B-405.3 Cross slope
Cross slope is the slope of the surface perpendicular to the direction of travel....
-
11B-405.7.4 Change in direction
Ramps that change direction between runs at landings shall have a clear landing 60 inches (1525 mm) minimum by 72 inches (1829 mm) minimum in the direction of downward travel from the upper...
-
Design of Shared Use Paths, Street Intersections, and Midblock Crossings
Sight Distance 1. Stopping Sight Distance a. Reaction Time b. Braking Distance c. Design Values 2. Criteria for Measuring Sight Distance a....
-
1. Public Right-of-Way
In particular, Kirola noted that while travelling around San Francisco, she encountered bumps and/or uneven surfaces along: (1) the east side of Fulton Street ("Fulton") between Fillmore...
-
Number of Accessible Entrances
Many persons with disabilities urged the Board to increase this scoping so that they have equal access in terms of convenience, entry options, travel distances, and proximity to accessible...
-
Enjoy a Relaxing Stay at Resorts Near Colva Beach Goa
Choosing from the best Resorts Near Colva Beach Goa allows travelers to experience the perfect combination of relaxation and convenience....
-
404.2.6 Doors in Series and Gates in Series
The distance between two hinged or pivoted doors in series and gates in series shall be 48 inches (1220 mm) minimum plus the width of doors or gates swinging into the space....
-
3. Toilet Centerline
Is the accessible toilet in each accessible guestroom bathroom centered 18" from the adjacent side wall, which is the distance that will permit a person with a mobility impairment to use...
-
A4.11.2 Other Requirements
Inclined stairway chairlifts, and inclined and vertical platform lifts (wheelchair lifts) are available for short-distance, vertical transportation of people with disabilities....
-
Inpro Corporation IPC® 940 Smooth Handrail with Reveal
Combines durability of our rigid sheet material with smooth, sleek texture Offers greater circumference and distance between handrail and wall enabling firmer grip ADA compliant...
-
Section 4.9.4
• Section 4.9.4 of the 1991 Standards requires handrails at the bottom of stairs to continue to slope for a distance of the width of one tread beyond the bottom riser nosing and to further...
-
1.2.6
Allowing 20% of local variations to slope up to 10% seems reasonable for a distance of one foot....
