Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the grab bar, fastener, mounting device,...
Search Results "Print Material"
Filters
Commonly Searched Documents
-
609.8 Structural Strength
-
Content
They wanted to learn more about the material discussed in the text. It was noted that the descriptions lacked color information....
-
11B-610.4 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
Acceptable Trail Surfacing Requirements
Trail surfaces are currently considered accessible only if the surfacing material is firm, stable, and slip-resistant and the trail has the engineered attributes of adequate width, moderately...
-
11B-903.6 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
ALTERNATIVE METHODS FOR HISTORIC PRESERVATION PROGRAMS {35.150}
ALTERNATIVE METHODS FOR HISTORIC PRESERVATION PROGRAMS {35.150} Using audio-visual materials and devices to depict inaccessible portions of historic property Assigning persons...
-
§ 37.167(h)
individual with a disability from traveling with a respirator or portable oxygen supply, consistent with applicable Department of Transportation rules on the transportation of hazardous materials...
-
11B-609.8 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the grab bar, fastener, mounting device,...
-
11B-903.6 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
[2010 ADA Standards] 105.1 General
For information on the availability of this material at NARA, call (202) 741-6030, or go to http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html....
-
101.4.5 Fire prevention
Fire Code shall apply to matters affecting or relating to structures, processes and premises from the hazard of fire and explosion arising from the storage, handling or use of structures, materials...
-
The Dipstick® Floor Profiler Tool
fast and accurate method of measuring floors for flatness and levelness using the American Concrete Institute (ACT), Canadian Standards Association (CSA), and American Society for Testing Materials...
-
Resources
Hospitality and Disability Initiative, Mid-Atlantic ADA Center http://www.adahospitality.org/ Find materials, resources, and training to help hospitality businesses reach and serve...
-
II. Research Methodology
Research Methodology Beginning in 2010 NCA and the Access Board began strategizing on how to provide a useful resource to trail managers on what natural surface materials were being used...
-
1134A.6, Item 2
The floor surfaces shall be of Carborundum or grit-faced tile or of material providing equivalent slip resistance....
-
4.1.6(1)(i)
(i) If the alteration work is limited solely to the electrical, mechanical, or plumbing system, or to hazardous material abatement, or automatic sprinkler retrofitting, and does not involve...
-
1134A.6, Item 2
The floor surfaces shall be of Carborundum or grit-faced tile or of material providing equivalent slip resistance....
-
11B-809.10.6.2 Slope
The floor surfaces shall be of Carborundum, grit-faced tile or of material providing equivalent slip resistance....
-
Guest Rooms and In-Room Guest Services
for which print instructions are provided for guests....
-
3. Conversion to Digital Cinema
Starting in the late 2000’s, a number of major movie studios entered into agreements to help defray the cost of conversion by paying a consortium of movie theater chains a “virtual print...
-
3. The Legislative History of the ADA
In 1990, the only way to include open-captions in a movie was to create a separate print of the movie and then laser-etch, or “burn,” the captions onto that separate print. ...
-
APPENDIX B: Federal Trail Data Standards – Class Matrix
• Typically native materials. • Tread continuous and obvious....
-
TITLE II COVERAGE AND FINDINGS
as out-of-class study materials for a future exam....
-
810.6 Rail Station Signs
The transmitters are placed on or next to print signs and transmit their information to an infrared receiver that is held by a person....
